Ships to: Worldwide,
Item:133088106875Intelligent 12V/24V 4-200AH Electric Car Motorcycle Battery Charger Automatic Smart Trickle ========================================================================== FEATURE This SMART 4-200AH 12V 2A 24V 6A LEAD-ACID BATTERY CHARGER is the ideal accessory for charging your vehicles battery in a safe and easy way. This charger uses a four stage charging system of constant current, constant voltage, then trickle charge and finally disconnectingwhen fully charged. A constant current with less heat protects the battery and stay safe when leaving it to charge. An integrated gauge allows you to fully see how much power is being used and a special safety protection feature ensures your peace of mind. n Fully automatic battery charger, 4 charging levelsn LCD display for user-friendly operation, the smart charging screen shows charging process directly, which facilitates users to manage the current of the batteryn Charging voltage 12 or 24 volts, charging current 2 amperes and 6 amperesn For batteries such as lead acid / nonwoven / gel /storage batteries etc.n Desulfurization function for older batteries - the charger can improved the desulfurization of lead platesn Winter mode for use at low temperatures, protective functions such as reverse polarity protection and short-circuit protection, trickle charge up to 4-200Ah battery size.n This battery charger uses micro MCU controller to automatically identify 12V or 24V batteryn Great work rate fan mute good effectn This battery charger uses three-phase charging mode (PWM charging mode), which includes constant current charging phase, constant voltage charging phase, floating charging phase.n Sleep mode: This charger is a green low-power power-saving charger that enters sleep mode during charging. Tap the display button on the control panel to wake up.n 7 protections: overcurrent protection, overvoltage protection, short circuit protection, overcharge protection, temperature control, intelligent repair, reverse protection. SPECIFICATION n Input Voltage：220V AC @ 50HZn Output Voltage：12V or 24V,with Auto Voltage Detectionn Output Current Rating：2A DC @ 12V DC; 6A DC @24V DCn Charger Current：2A or 6An Working Temperature：-20~+60 ℃n Power cord length:110cmn Output line length:73cmn Evaporation Functionn Automatic Trickle Functionn Soft start functionn Material: ABS Flame Retardant materialn Manufacturers IC High Efficiency, long service lifen Great work rate fan mute good effectn UK plug（If you want EU/AU/US Plug one, please leave a message when you placed order） All our products are in stock and ready for immediate dispatch FOUR-PHASE CHARGING MODE n Constant current mode:When the voltage of the battery is lower than the value set by the charger, the charger will work under the constant current mode and supply the constant current for the battery.n Constant voltage mode:Using the pulse width modulation(PWM) tech to control the charging current and output voltage of the charger which ensures the battery is fully charged and avoids over charging.n Floating charge mode:When the CHARGED (green) LED is pulsing. the charger has started maintain mode. In this mode, the charger keeps the battery fully charged by delivering a small current when necessary. If the charger has to provide its maximum maintain current for a continuous 12 hour period, it will go into abort mode. This is usually caused by a drain on the battery or the battery could be bad. Make sure there are no loads on the battery. If here are, remove them. If there are none, have the battery checked or replaced.n Desulfation mode: Desufation could take 8 to 10 hours. If desulfation fails, charging will abort and the CHARGING(yellow)LED will flash DIGITAL DISPLAY The display will show the battery VOLTAGE when the charger is not charging a battery. When it goes into charging mode, the display will automatically change to ON (to show charging has started) and then show the percent-of-charge of the battery being charged and either 12 or 24 (the voltage of the battery. determined by the charger). If you manually stop the charging process (by pressing the KEY button) before the battery is fully charged, the display will show OFF: n Battery % - The digital display shows an estimated charge percentage of the battery connected to the chargers battery clamps.n Voltage - The digital display shows the voltage at the charger battery clamps, in DC voltsn LED INDICATORS REVERSED (red) LED flashing: The connections are reversed.n CHARGING (yellow) LED lit: The charger is charging the battery.n CHARGING (yellow) LED flashing: The charger is in abort mode.n CHARGED (green) LED pulsing: The battery is fully charged and the charger is in maintain mode.n During charging, the display will go into sleep mode and will not show the percentage of charge or voltage of the battery. To turn the display back on, press the button. PACKAGE n 1 * Battery Charger（UK plug）n 1 * User Manual NOTE« Do not block cooling hole or use the charger with the cooling fan off.« This product is non-waterproof, please avoid the water. WARRANTY þ We offer a 30 days money back guarantee. And if you have any problem about the item, you can contact us and we will help. If you are unhappy with the item for any reason. In this case, we accept buyer to send back the items and full refund. þ If you have any inquiry, please contact us through eBay Contact seller message or email us with your name / eBay ID & item number before bidding ==========================================================================Condition:New, Battery types:Lead Acid - AGM, GEL, WET, Brand:Unbranded, Charger Current:2A or 6A, Fit for:4-200AH lead-acid batteries, Input Voltage:220V AC @ 50HZ, Manufacturer Part Number:Does Not Apply, Output Current Rating:2A DC @ 12V DC; 6A DC @24V DC, Output line length:73cm, Plug:AU/EU/UK/US, Power cord length:110cm, Power Source:Battery, Type:Battery Charger, Voltage:12V or 24V with Auto Voltage Detection, Working Temperature:-20~+60 ℃
PicClick Insights for "
12V/24V Electric Car Vehicle Battery Charger Maintainer Automatic Pulse Repair