Glukometr ACCU CHEK PERFORMA mmol/l + 50 testów FREE SHIPPING !

Accu-Chek® Performa Meter + 50 Free Performa Strips

 The Accu-Chek Performa meter is easy to use.  Just 3 simple steps are enough to carry out an accurate measurement.

 Advantages:

 accurate measurement, meet strict measurement accuracy requirements

 defined by the ISO 15197:2013 standard and the recommendations of the Polish Diabetes Society 2014.1

 large, easy-to-read screen

 test strips that quickly suck up a drop of blood

 Technical data:

 Display: large LCD screen

 Power supply: 1 battery, type CR 2032

 Blood drop size: 0.6 µL

 Measurement range: 0.6-33.3 mmol/l

 Blood sample type: capillary, venous, arterial and neonatal

 Ability to measure from alternative sites (AST): YES

 Hematocrit range: 10 to 65%

 Battery consumption: approximately 1,000 measurements

 Measurement time: about 5 seconds

 The measurement should be performed at air temperature: from +8 °C to 44 °C

 The meter should be stored in a place where the air temperature is between -25 °C and 70 °C

 The maximum altitude at which the meter operates: 3,094 m above sea level.

 Low blood drop warning: YES

 Memory capacity: 500 results with date and time and 20 control test results

 Dimensions: 94 x 52 x 21mm

 Weight: 59g with battery

 Data transfer to PC: via infrared port and Accu-Chek Smart Pix device (sold separately)

 Measuring principle: electrochemical measurement

 Calculation of average results: from 7, 14, 30 and 90 days

 Stability of the test strips: 18 months from the date of manufacture; the test strips are stable at least until the expiration date stated on the vial.  IMPORTANT!  the test strip vial must be tightly closed each time immediately after removing the test strip.

 The starter kit includes:

 Case

 Lancing device and one drum with 6 Accu-Chek® FastClix lancets

 Accu-Chek® Performa Test Strips - Pack of 50

 Battery

 User manual

 Quick Start Guide

 How to measure?

 Make sure your hands are clean and dry.

 Insert the test strip into the meter - the device will turn on.

 A small drop of blood is enough!  Put the test strip side with the yellow window on it.

 After about 5 seconds, the result will appear on the screen.

 5 seconds after removing the test strip from the meter, the device will turn itself off.