Universal Digital Display Meter 0-10V 0-20mA 2-10V 4-20mA Analog Input Meter

EUR 11,21 Sofort-Kaufen, Kostenloser Versand, 60-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: sensecore ✉️ (134.020) 99.6%, Artikelstandort: ShenZhen, CN, Versand nach: WORLDWIDE, Artikelnummer: 275880473790 Universal Digital Display Meter 0-10V 0-20mA 2-10V 4-20mA Analog Input Meter.

Sales for every weekend! For Raspberry Pi For Arduino For Mega2560 Relay Amplifier ESP8266 UNO R3 USB/LCD L/C Meter Power supply      Step up module      Step down module Adapter Module Display module Sensor Ein-Euro-Artikel Breadboard Cable and Prototype GPRS Board Switch LED Cables Wireless module Receiver&Transmitter Servo

Universal Digital Display Meter 0-10V 0-20mA 2-10V 4-20mA Analog Input Meter Standard Edition With RS485 version With relay output version Digital display instrument analog output link Mechanical size: 79 × 43 × 25mm; Installation opening: 76.5 × 39.5mm. 1. The meter can be called a universal analog input display meter. It can be matched with various sensors with analog output to display the actual physical quantity. Such as temperature transmitter, frequency converter, motor speed, pressure, liquid level, concentration, etc. 2. The instrument supports current input or voltage input. 3. Default adaptation: 0-10V, 2-10V, 0-20mA, 4-20mA. By setting the bias parameter and gain parameter, it can adapt to other inputs in the range of 0-10V, or 0-20mA. 4. It is displayed as a percentage by default. You can also set your own display range through F0-2 ~ F0-4. 5. The instrument with 485 interface has already supported the communication between the meters, and it is convenient to realize multiple displays.

 

I. Main features:

1. Model description:standard version: HXDSBOXAH-NR:

With RS485 version: HXDSBOXA-485:

With relay output version: HX DS BOXAI-RL

2. Standard version and version with RS485, rated power supply voltage range: DC6~25V, power consumption: 24V/40mA: with relay output version, rated power supply voltage

Range: DC8~25V, power consumption: 24V/50mA: power supply anti-reverse connection and surge protection

3. 1 analog input, voltage type or current type can be selected

4. Voltage type input impedance: >30kQ, current type input impedance: <250Ω

5. Rich parameter settings (please see the parameter description), with its own button, easily complete the parameter configuration: 0.56 inch 4-digit digital tube

6. "With RS485 version", using standard Modbus-RTU protocol, easy to achieve networking: and support networking between tables,

7. "With relay output version", with 1 normally open relay output, relay load capacity: 3A30Dc/3A250VAC;

8. Mechanical size: 79×43×25mm: installation opening: 765×395mm.

 

II. Indicator light and signal description:

1. Front panel diagram

 

2. Indicator light:

a. Only "with RS485 version" is useful: R communication receives data indication: T communication sends data indication

b. Only the "with relay output version" has: S indicator light on when the relay is closed

3.Port signal description

 

 

Explanation

PWR

Connect to the positive pole of the power supply

(standard version and version with RS485: DC6~30V: with relay output version: DC8~30V)

GND

Power and signal ground

Ai

Power and signal ground

mA

Current-type analog input signal configuration interface, short-circuited with A,

then configured as current-type input

With RS485 version

485-

RS485 signal is negative

485+

RS485 signal is positive

With relay output version

KA

Relay normally open contact output port

 

 

4.Common wiring diagram: 5. Button and digital tube display state transition diagram: Special note: In the third-level menu, click OK to save the modified parameter value and return to the previous menu, the parameter number is automatically increased by one; and click the SET button to directly return to the previous menu without saving the modified parameter value . Long pressto make the adjustment value change quickly.

III.Parameter description:

The parameters are described as follows

1. F0 Attendant array display

Parameter

parameter name

Scope and description

Defaults

Read  write

FO-0

Collected value monitoring

Monitor the percentage of the current analog input value. Range: 0-100.0%

read-only

FO-1

Display value monitoring

In the display value in "Monitoring Menu" is calculated by F00, F0-2~F04.

read-only

FO-2

Display accuracy

The number of decimal places displayed in the "Monitor Menu", range: 0-3.

1

Read  write

FO-3

Show minimum

In the "monitoring menu", the value corresponding to "acquisition value" is 0%, the range: -1999~9999

0

Read  write

FO-4

Show maximum

In the "Monitoring Menu", the value corresponding to the "Acquisition Value" is 100.0%, the range: 19999~9999

1000

Read  write

2. F1 parameter group-analog configuration parameters

Parameter

parameter name

Scope and description

Defaults

Read  write

F1-0

Input type selection

0:0~10V or 0~20mA corresponds to 0~100.0%

0

Read  write

F1-1

Input filter time

1: 2~10V or 4-20mA corresponds to 0~100.0%, and it is 0 when it is lower than 2V or 4mA.

0.200

Read  write

F1-2

Input gain

Analog input filter time, range: 0-10.000S. The greater the filtering time, the stronger the filtering.

Range: 0~1000.0%.

100.0



Read  write

F1-3

Input offset

-99.9~99.9%, with 10V or 20mA as 100.0%.

0.0

Read  write

F1-4

Keep

Unused

0

Read  write

F1-5

Enter the parameter setting selection

0: Long press SET button for 3s to enter the parameter setting mode: 1: Keep pressing SET button for more than 3s, and

Press OK to enter parameter setting mode

0




Read  write

The formula of analog input gain and bias is: adjustment result = (acquisition value + offset) × gain

F2 parameter group relay output dosing (with relay Output version)

Parameter

parameter name

Scope and description

Defaults

Read  write

F2-O

Relay output status configuration

When the output conditions are met, the relay output status:

0: No control (always open) 1: Relay closed 2: Relay open (not satisfied Closed on condition)




0




Read  write

F2-1

Condition type

0: greater than comparison value 1, 1: less than comparison value 2.

2: Greater than comparison value 1 and less than comparison value 2.



0




Read  write

F2-2

Comparison value 1

Range: 0-100.0%

50.0

Read  write

F2-3

Comparison value 2

Range: 0-100.0%.

50.0

Read  write

F2-4

Hysteresis interval

In order to prevent the relay output from operating frequently near the comparison value, hysteresis interval parameters are introduced

Range: 0.0%~80.0%.




Read  write




Examples are given to illustrate the action mechanism of the hysteresis interval: for example, if "F2 condition type" is selected as "0: greater than comparison value 1", "F22 comparison value 1" is set as 50.0%, and "F24 hysteresis interval" uses the default value of 5.0%. When power on, the collected value increases gradually. When it is greater than 50.0% + 5.0% / 2, the output condition is satisfied. If the collected value decreases, it needs to be less than 50.0% - 5.0% / 2 to reach the non output condition.

F7 communication parameters and software version (communication parameters are "with RS485 version" for use)




Parameter

parameter name

Scope and description

Defaults

Read write

F7-0

Local address

Range: 1~247

1

Read write

F7-1

Baud rate

0:1200bp;1: 2400bp5;2:480bps:   3: 9600bps

4:1920bps;5: 38400bps

3

Read write

F7-2

Data Format

0:8,1, None (8 data bits, 1 stop bit, no parity)

1:8,1, Even (8 data bits, 1 stop bit, even parity)

2:8,1,Odd (8 data bits, 1 stop bit, odd parity

3:8,2, None (8 data bits, 2 stop bits, no parity)




0




Read write

F7-3

Response delay

Communication response delay time 0~500ms

5

Read write

F7-4

Communication type

Use above V1.02

0: The display table is a Modu slave, and the user host can read the collected values of the display table:

1: The display table is a network slave between the tables, and can receive the display data of the display table set as the master:

2: The display table is the network host between the tables, and the display value is sent to the slave display table through the broadcast address

3: The display table is the inter-table networking host, and the display value is sent to the slave by means of address polling

Display table, address polling range is: 1~F70 value.














0














Read write

F7-5

Parameter recovery

Set to 111 to restore the parameters to the factory settings: other values are invalid.

1313

read-only

F7-6

Model code

Module model code 0521H

0.1

F7-7

Send interval time

The interval time for the host to send the data table during master-slave communication. Range: 0.1~100. 0s



Read write

F7-8

Software version number

Set module software version number, two decimal places. 1.00 corresponds to the software version number is v1.00



read-only

Four、Communication protocol and communication method of "with R485 communication version"

1. The user host accesses the collected value of the display table

Communication uses standard Modbus-RTU protocol, read with multiple read command 03H. The returned parameter value is the integer displayed by the nixie tube with the decimal point removed. For example, the F0-0 nixie tube display value is 60.0, and the value read by communication is 600. The Modbus register address has a corresponding relationship with the parameter, such as

The Modbus register address corresponding to F72 is 0702H, that is, 7 in F7-2 is the high 8-bit value, and 2 in F72 is the low 8-bit value.

For example, read the parameters F0-0 and F0-1 parameter values (the F1 parameter group uses the default parameter settings), the format is as follows:

host sends a selective dance

Slave (HXDSB0XAI) response data

Slave address is F70

01H

Slave address ( F7-0)

01H

Mbus function number

03H

Modbus function number

03H

Start address (high byte)

00H

Returns the number of bytes (4 bytes)

04H

Start address (low byte)

00H

High byte of address content

02H

Read word count (high byte)

00H

low byte of the content of 000 address

58H

Read word count (low byte)

02G

High byte of 0001H address content

02H

CRC (low byte)

C4H

Low byte of 0001H address content

58H

CRC (high byte)

OBH

CRC (low byte)

7AH

CRC (high byte)

C2H

In the above example, the read f0-0 and f0-1 are both 0258h = 600, that is, the collected value f0-0 is 60.0%; the displayed value f0-0 is 60.0

2. Network Description:

Through the inter table networking, the display value of the data collected from the master table can be transmitted to the slave table through RS485. There can be only one master table in a network, and there can be multiple slave tables. In use, only the main table needs to set the corresponding display range, and the slave table does not need to set the display range.

Payment

We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

Shipping

We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

-We ship items to Worldwide. Thank you!

-we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.

Refund

* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.

* Please include your eBay ID and item number with any email requests.

Feedback

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time " For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.


Am 01.12.21 hat der Verkäufer die folgenden Angaben hinzugefügt:


Am 01.06.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:

  • Condition: Neu
  • Select Type: Standard
  • Marke: Markenlos
  • Brand: Unbranded
  • Color: Black
  • Model: HXDSBOXAH
  • Type: Meter
  • Features: Display
  • Voltage: DC8~25V
  • Current Type: DC

PicClick Insights - Universal Digital Display Meter 0-10V 0-20mA 2-10V 4-20mA Analog Input Meter PicClick Exklusiv

  •  Popularität - 7 Beobachter, 0.0 neue Beobachter pro Tag, 303 days for sale on eBay. Super hohe beobachtend. 9 verkauft, 10 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 134.020+ artikel verkauft. 0.4% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv