A spirit based stain suitable for spray, dip and hand application. Formulated to provide excellent grain definition and depth of color on all wooden substrate, including floors. This range can be used to tint Morrells Precatalytic and Acid Catalyst lacquers up to a maximum of 5% by volume.
Preparation:
Prepare the timber by sanding using a 180 grit sandpaper. Before applying Morrells Light Fast Stain ensure the surfaces are clean, dry and free of dust and debris and all sand dust must be wiped off. Apply 1 to 2 coats for desired finish of the wood. Keep good air ventilation. Always carry out a colour test on a small area to check suitability. Different types of timber may have a slightly different stained finish due to natural variances in timber.
Application:
Light fast can be applied by hand using a clean, lint free cloth. Always work along the grain when applying and wiping excess stain. If applying using a spray gun, apply evenly a wet coat and wipe excess stain with a lint free clean cloth. Always follow grain of wood to apply stain avoid excessive gun strokes. The wiping off process will enhance the evenness of the colour and highlight the grain definition and the natural look of the substrate.
Cleaning:
A suitable Light Fast Thinner should be used for cleaning the stain and from all application equipment.
Pack Sizes Available: 100ml Tester/Sample, 250ml, 500ml, 1L.
Product Information:
Touch dry: 15 - 30 minutes at 18 degrees. Fast drying with a satisfying quality finish
Coverage : Approximately 8 - 12 square meters per 1 litres dependent upon the size, orientation and surface quality of the wood/timber being coated.
We ship items to most countries please select your country in postage and packaging section for up to date postage price.
SPECIAL NOTE :
** Please note the i mages shown are for illustration purpose only. The image shows trade bottles, anything less will be sent in clear labelled bottle .** All multiple orders will be dispatched together. Multiple same stain colour bottles maybe upgraded in a single larger bottle quantity for simplicity. Where there's a larger bottle available for multiple orders it will be sent instead of several smaller bottles (e.g. for an order of five one litre same colour stains a single container of 5L will be sent unless a customer has specified in a request message to do so). We may also send for a 5L order, 5X1L bottles to make it 5L; depending on stock available at time of order. 100ml , 250ml, 500ml, 1L are repacked in our own Eurolincs Trading Ltd branded packaging, 5 Litre stain comes in Morrells branded packaging. Although we offer free shipping in whole of UK but for orders greater than 1 Litre quantities we may charge an additional postage charge for Northern Ireland, Scottish highlands and border counties, Guernsey, Jersey and Channel Islands.