C3 PLUS Auto Projektor HUD Navigation GPS OBD2 EOBD Tacho Head Up Display

EUR 78,19 Sofort-Kaufen oder Preisvorschlag, EUR 15,09 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: declanrose ✉️ (1.889) 97.4%, Artikelstandort: Leeds, GB, Versand nach: GB und viele andere Länder, Artikelnummer: 234760541008 C3 PLUS Auto Projektor HUD Navigation GPS OBD2 EOBD Tacho Head Up Display.

OBDHUD C3 PLUS   With live Navigation

C3 including OBD system and GPS system,dual systems,and has two cables,OBD cable and USB cable.

OBD2 mode working voltage: 11V~18VDC (12vdc/200mA),

GPS mode: when voltage is higher than 24v, please use a USB cable for GPS mode.

So C3 compatible with all cars

OBD2 mode including speed,RPM,water temperature,battery voltage,clock,driving time,driving distance,fuel comsumption,altitude,satellite numbers,turbine pressure,air-fuel ratio,intake pressure,KM/H,MPH,data stream....

GPS mode supports speed,driving time,driving distance,satellite numbers,data stream......

C3 supports speed alarm,RPM alarm,water temperature alarm,voltage alarm,DTCS alarm,fatigue driving reminder.

Brightness can be adjusted according to the environment.Auto automatic light sensitive, 1 for the darkest, 8 for the brightest

C3 supports speed alarm,RPM alarm,water temperature alarm,voltage alarm,DTCS alarm,fatigue driving reminder.

Please read carefully before placing an order: 1. If your car is pre-2004 (for US automakers) and pre-2008 (for European/Asian automakers), the protocol is not compatible.

2. After receiving the package, please test it on your car as soon as possible. If you do not want to keep the device after testing, you can also contact us to return it for a full refund

3. According to customer feedback, it is not compatible with some special vehicles, such as electric vehicles, diesel vehicles, hybrid vehicles, pickup trucks, passenger cars, etc. If you still have questions, please contact us before buying, preferably tell us your car make/model/year/agreement before buying.

4. HUD includes two chipsets, OBD and GPS. Although OBD may not be compatible with your car, its GPS is suitable for all vehicles and displays speed, travel time, satellite time, altitude, number of satellites, driving direction, and a single Mileage, voltage, acceleration test, brake test. Various alarms are also included: speeding alarm, free switching between kilometers and miles.

PROJECTOR AUTO HUD

Front view hud You can view navigation and information at eye Level instead of lookingdown repeatedly to ensure safer driving

DOUBLE SYSTEM

GPS System ( For All Cars)

OBD System (For OBD2 EOBD car)

Car speedometer /Compass/Car clock/ Posicionamiento GPS /HD Display / Combustible

Sound Switch: ON buzzer on/ OFF buzzer off

Overspeed warning: alarm will turn on when the vehicle speed reaches the default value of 150KM/h,setting range from 5-200km/h

Engine temperature alarm: its default value 120 degrees C,range 50-200

Engine speed alarm: its default value of 6000r/min,range 1000-8000

Voltage alarm setting: its default value of 10.5v,range 10.0-15.0v

Speed adjustment: the operation is required only there is an error(e.g. instrument display 100 Km/h HUD shows 105Km/h,use default value 107-5=102)

Speed zero: the vehicle speed does not return to 0 after the car stops

(E.g. speed display 5Km/h,please adjust HUD to 6Km/h)

Voltage adjustment:  Fine-tuning when voltage is wrong with instrument panel voltage

(If the device shows 0.2V above the meter voltage, the device is adjusted to 98%)

Engine displacement:  please adjust if there is too much deviation on the fuel consumption

(E.g. make parameter value to 3.6L,if your car displacement is 3.6L)

Fuel consumption: making a fine-tuning if there is an error

(If the device shows 0.2L above the meter voltage, the device is adjusted to 98%)

NAVIGATOR FOR ALL CARS

Compass / Automotive gps /Built-inMap-Mapbox For global

Car speedometer

Mileage display Support multiple lanquages With live navigation

OPTICAL IMAGING NO DOUBLE IMAGE

Clock / driving direction / Altitude/total driving distance Power test Average fuel consumption /WatertemperatureNoltage/ RPM/ Turbine pressure/ speed alarm Fatique driving reminder

MULTIPLE LU SELECTION

SUPPORT MULTIPLE LANGUAGES WORLDWIDE

App Bluetooth With live navigation Built-in map mapbox

INTRODUCTION TO UI FUNCTIONS

READ ALL DATAS

ACCELERATED TEST

Acceleration at 100 kilometers takes time and the operating performance isstronger It takes time for the car to accelerate from okm/h to 100km/ h,and important reference data for the vehicle's dynamic performance!

Including all HUD functions

Stereo button designSimple and unique innovative experience

selected polycarbonate and ABS hybrid Art, based on the beautiful shape to achieve high temperature resistance without deformation, UV resistance does not change color and high performance. Adjust to your comfortable driving angle

1.The difference between C3 and C3 Plus

C3 : OBD + GPS---dual systems

C3 Plus :OBD + GPS+Navigation---dual systems and navigation(Navigation function:driving direction, time, distance,speed)

2.Working voltage.

OBD2 mode working voltage: 5 V~18VDC (12vdc/200mA)

when voltage is higher than 24v, please use a USB cable for GPS mode.

3.About the manual.

The manual is in English,if you need electronic manuals in other languages, please contact customer service.

Navigation FAQ :

1. How to install APP

(1)  Please download software ‘WiiYii’

(2)  manually turn on the Bluetooth and location

(3)  click the icon of WiiYii,system will automatically search the Bluetooth and connect

2.Bluetooth cannot connect to Phone

(1) HUD host needs to display normally, if the OBD system cannot be connected, switch to GPS system normal display

(2) Whether your phone's Bluetooth is connected to another device, delete the bluetooth device that has been paired, and then bind to WYHUD

(3) Turn Bluetooth off again and then turn on your phone's Bluetooth, or restart your phone

(4) Make sure that other phones turn off Bluetooth

3.APP Bluetooth connection is not successful.

(1)Check the phone system version and whether it supports Bluetooth 4.0, Apple system IOS9 or above, Android 4.4 or above

(2)Need mobile phone to search for WYHUD via Bluetooth,Open traffic

(3)Turn on GPS navigation positioning, you can enter the navigation address after successful positioning

4.App Bluetooth connection is successful,no display of input address.

Please turn on the location service,open your network,check the signal,please move to a place which has a strong signal,and enter the address again

5.HUD stuck during navigation or when you switch the display interface, speed display is normal.

Turn off the power-saving mode of the phone, turn off the screen forbidden function, or click to enter the phone navigation page and stay on the phone navigation page

6.Navigate 10-20m from the indication point.

Because the GPS positioning error is about 5-10 meters, it is normal for the satellite signal to be 10-20 meters when the signal is weak.

OBD2 FAQ:

1.No function is displayed,no power

Check whether the OBD cableis tight connection,pull down repeatedly to confirm,please try it on another car if still not workable,analysis if it is an error from OBD diagnostic interface,if yes,please repair it and connect the device again.

2.Only the car voltage displays and be automatic power off after 30 second

(1) This product is only available for OBDII and EOBD cars when it is in OBD2 mode

(2) This product OBD2 mode does not support OBD I and JOBD

(3) OBD2 is a car protocol(U.S.A Cars:2003 Other regions:2007)

(4) Switch to the GPS system using the USB cable to display, within 5 seconds of power short press the “> ”key to select the GPS system.

3.The vehicle speed on HUD is not as same as speedometer’s.

(1) Please check that the unit is correct KM/mile MPH, (speed unit switch please refer to the settings)

(2) Vertical long press the "M" button into the system settings, press ">"to select the speed adjustment menu,and make a fine-tuning (e.g. meter displays 100 Km/h,device shows 105Km/h,use default value 107-5=102 ).

4. There is an error on fuel consumption.

(1) Checking your car displacement and make sure that the engine displacement of the device is as same as your car’s(e.g. car is 2.0L,please set parameter value to 2.0L)

(2) if the displacement is the same,you can also do a fine-tuning settings(e.g. equipment fuel is higher than 0.2L,please set the parameter to 98%) Recommended: fine-tuning is optional since it is a real data from car computer

5.This device cannot auto shut down.

After the car engine stops,the RPM on the machine can not be turned off,please set voltage to 13.2V or 13.6V,so that the car can be turn off after 3 minutes.

6. Automatic start-up will auto off when step the brake and same situation on Hybrid car in the traffic.

( 1 ) Setting to COM mode(in the menu of shutdown voltage)

( 2 ) Setting shutdown delay to 300 seconds,so that it can turn off after 5 minutes

( 3 )  Please switch to the GPS system(Short press “>”within 5s)

7.Wrong operation lead to crashes.

(1)Are there other other OBD devices on OBD2 interface (parking sensor,TPMS,lock lift window,ELM27)

(2)Had your car been modified and brushed(central navigation,electronic throttle controller,fixed speed cruise)

(3)No matter engine start stop,keyless entry or remote start will cause a crash,unplug other OBD devices,and do a factory reset (see the menu settings)

Please switch to GPS system(short press ”>” within 5s) which should be connected with a USB.

If the OBD system does not work properly, try to switch the GPS system,use USB cable plug into the cigarette lighter.

GPS FAQ:

1.The screen is not displayed, no power

Check the OBD cable or car charger is in tight connections,try it several times to make sure,or plug a USB cable into the cigarette lighter

2.No speed

GPS will take a short of time to search the satellites,please drive the car to the open road to get 5 and more satellites so that Gauge can be used normally

3.HUD cannot automatically power on or repeatedly extinguish during driving

Setting the shutdown voltage to 13.0V or 12.8v(in OBD mode)

4.Inaccurate clock

Enter into the settings(System time):press">"to adjust and press"M"to save exit

5.Speed is not correct

(1) If the unit is correct,km KM/mile MPH, (speed unit switch reference settings item)

(2) The car factory had increased speed(5-7%)than real for drivers’ safety,satellite data is strictly follow the international standards

(3) Fine-tuning the vehicle speed, e.g. meter display 100 Km/h, machine display 105Km/h,default value 107-5=102

6.There is an error of travel direction

Satellite cannot recognize the driving direct without speed display,it will be normal until exceeds 5KM/H

7.Speed is still on display after the car stops

Satellite drift will be caused in underground parking,tunnel,overpass or blockers,please drive your car on open road,then this situation can be solved after the satellite numbers >5

8.HUD cannot be automatically shut down after car stopped

(1) HUD can be shut down in 3 minutes(in OBD mode)

(2) If not in 5 minutes,set item shutdown voltage to 13.5V or switch to GPS mode

  • Condition: Neu
  • Brand: Unbranded
  • Installation: Connect with OBD Port
  • Product Usage: Auto Electronic Accessory
  • Language: English
  • Wire or Wireless: wired
  • Installation Positon: Center Console
  • Suitable models: Suitable for all cars
  • Rated Power: on-board computer car obd2 gps
  • Cable line: 1.8 meter

PicClick Insights - C3 PLUS Auto Projektor HUD Navigation GPS OBD2 EOBD Tacho Head Up Display PicClick Exklusiv

  •  Popularität - 64 Beobachter, 0.1 neue Beobachter pro Tag, 514 days for sale on eBay. Super hohe beobachtend. 25 verkauft, 4 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 1.889+ artikel verkauft. 2.6% negativ bewertungen. Guter Verkäufer mit positivem Feedback und gute Bewertung.

Die Leute Mochten Auch PicClick Exklusiv