Netgear XSM7224S 24-Port Switch 10GBE Gigabit L2+ 10GBaseT und SFP+ Stackable

EUR 579,00 Sofort-Kaufen oder Preisvorschlag, EUR 19,90 Versand, eBay-Käuferschutz
Verkäufer: bitranoxx ✉️ (65) 100%, Artikelstandort: Wien, AT, Versand nach: EUROPEAN_UNION, Artikelnummer: 394621052477 Netgear XSM7224S 24-Port Switch 10GBE Gigabit L2+ 10GBaseT und SFP+ Stackable. keine Angst vor SFP+ Ports - es ist wirklich einfach und auch vorteilhaft optische Kabel zu verwenden. Überdies ist ein Switch mit SFP+ auch in Summe günstiger als ein Switch mit lauter RJ45 10GBaseT ports. Finden Sie eine Erklärung weiter unten, welche Verbindungsmöglichkeiten Sie haben. Der Switch wurde bei uns in der Firma durch einen größeren ersetzt, arbeitet aber einwandfrei.  - jeder einzelne Port getestet  - Lithiumzelle CR2032 ersetzt  - neueste Firmware aufgespielt Der NETGEAR XSM7224S ist ein vollständig verwalteter Ethernet-Switch der ProSafe Produktlinie mit 24 LAN-Anschlüssen. Der Switch bietet eine maximale Datenübertragungsrate von 10 Gbps und unterstützt 10 Gigabit Ethernet (10000-Mbit/s). Der Formfaktor ist rackeinbaufähig und die Anschlussart ist SFP+. Der Switch ist stapelbar und verfügt über ein Netzwerkmanagement-System. Die Ethernet-Technologie ist L2+ und der Layer ist 2+. Der NETGEAR XSM7224S ist die perfekte Wahl für Firmennetzwerke und Server, die eine schnelle und zuverlässige Verbindung benötigen. Mit dem Switch können Sie sicher sein, dass Sie eine hochwertige Lösung für Ihr Netzwerk haben. der Switch hat folgende Anschlüsse :  - 24 x 10-Gigabit-SFP+-Anschlüsse - Alle SFP+-Ports unterstützen 1000 Mbit/s/10 GE-Geschwindigkeit - 4 gemeinsam genutzte RJ45-Ports mit automatischer Erkennung (10GBaseT) - Alle RJ45-Ports unterstützen 1000 Mbit/s/10 GE-Geschwindigkeit - USB-Anschluss (Speicherung von Konfigurations-/Firmware-Dateien) - Serieller RS-232-Anschluss für Konsole - Management auch über Web Interface einfach möglich Sie können bis zu 4 solcher Switches stapeln. Sie können in den Switch auch noch ein zweites, redundantes Netzteil einbauen - aber notwendig ist es nicht. Um Rechner mit dem Switch zu verbinden, empfiehlt es sich 10GB Netzwerkkarten mit SPF+ Anschluß zu verwenden -  eine solche Netzwerkkarte kostet um die EUR 80-90. Ich empfehle z.B. Intel X520-DA1 PCIe Netzwerkkarten. Aufpassen, Fiber Channel Adapter sind nicht für Ethernet Netzwerk geeignet ! Sie haben nun verschiedene Möglichkeiten die SFP+ Ports zu verbinden (habe ich alle getestet):  - direct attach cable, SFP+ auf SFP+, z.B. "10G SFP+ Direct Attach Kupfer kabel Passiv 30 AWG 3M", kostet ca, EUR 21,-   Vorteil : billig, Nachteil: unflexibel, maximal 5-10m Länge - oder Sie verwenden 2 x SFP+ Tranceiver für Multimode Faser (MMF) mit LC Anschluß  - z.B.    "Original Arista SFP-10G-SR 10GBASE-SR SFP+ Module" unter https://www.ebay.de/itm/265795799695   das kostet ca. EUR 9,90 pro Stück    und dazu ein MultiMode OM3 (billiger) oder OM4 (besser) Glasfaserkabel mit LC auf LC Steckern :    z.B. "Glasfaserkabel OM3 / OM4 Multimode Patchkabel LC/LC UPC Duplex | 0,5m - 200m"   unter  https://www.ebay.de/itm/254174773820?var=553532499962   das bessere OM4 Kabel kostet EUR 10,58 für 5 Meter.   Vorteil: bis zu 300m mit OM3 oder 400m mit OM4 Kabel. Bei OM4 späterer Ausbau auf 40GBit möglich ! - wenn Sie unbedingt 10GBaseT Anschlüsse benötigen, so können Sie die 4 Anschlüsse des Switches verwenden - sollte Sie zusätzliche 10GBaseT Anschlüsse benötigen, so können Sie einen SFP+ auf 10GBaseT Tranceiver einsetzen -    ein solcher Tranceiver kostet ca. EUR 65,- - für weitere 1000Base (1 GBit) Anschlüsse empfehle ich Ihnen einen zweiten 1000Base-T Netgear Switch mit SFP+ Uplinkport einzusetzen (z.B. Netgear MS510, M4250, etc.)  So kommen Sie zu einem günstigen, kompromisslos schnellen Netzwerk, mit galvanischer Trennung (wenn Sie Glasfaser verwenden) ================ don't be afraid of SFP+ ports - it's really easy and also advantageous to use optical cables. Moreover, a switch with SFP+ is also cheaper in total than a switch with noisy RJ45 10GBaseT ports. You can find an explanation below, which connection options you have. The switch was replaced by a bigger one in our company, but it works perfectly. Each port has been tested individually. the switch has the following ports :  - 24 x 10 Gigabit SFP+ ports. - all SFP+ ports support 1000 Mbps/10 GE speed - 4 shared RJ45 ports with automatic detection (10GBaseT) - All RJ45 ports support 1000 Mbps/10 GE speed - USB port (configuration/firmware file storage) - Serial RS-232 port for console - Management also easy via web interface You can stack up to 4 such switches. You can also add a second redundant power supply to the switch - but it is not necessary. To connect computers to the switch, it is recommended to use 10GB network cards with SPF+ connector - such a network card costs around EUR 80-90. I recommend e.g. Intel X520-DA1 PCIe network cards. Be careful, fiber channel adapters are not suitable for Ethernet network ! Now you have different possibilities to connect the SFP+ ports (I tested all of them):  - direct attach cable, SFP+ to SFP+, e.g. "10G SFP+ Direct Attach copper cable passive 30 AWG 3M", costs about, EUR 21,-.   Advantage : cheap, disadvantage: inflexible, maximum 5-10m length - or you use 2 x SFP+ transceivers for multimode fiber (MMF) with LC connector - e.g.    "Original Arista SFP-10G-SR 10GBASE-SR SFP+ Module" at https://www.ebay.de/itm/265795799695   that costs about EUR 9,90 per piece    and a MultiMode OM3 (cheaper) or OM4 (better) fiber cable with LC on LC connectors :    e.g. "Fiber Optic Cable OM3 / OM4 Multimode Patch Cable LC/LC UPC Duplex | 0,5m - 200m"   unter https://www.ebay.de/itm/254174773820?var=553532499962   the better OM4 cable costs EUR 10,58 for 5 meters.   Advantage: up to 300m with OM3 or 400m with OM4 cable. With OM4 later extension to 40GBit possible ! - if you absolutely need 10GBaseT ports, you can use the 4 ports of the switch - if you need additional 10GBaseT ports, you can use a SFP+ to 10GBaseT tranceiver -    such a tranceiver costs about EUR 65,- - for additional 1000Base (1 GBit) ports I recommend to use a second 1000Base-T Netgear switch with SFP+ uplink port (e.g. Netgear MS510, M4250, etc.)  This way you get a cheap, uncompromisingly fast network, with galvanic isolation (if you use fiber) ============= Non temete le porte SFP+: è davvero facile e vantaggioso utilizzare i cavi ottici. Inoltre, uno switch con SFP+ è complessivamente più economico di uno switch con le rumorose porte RJ45 10GBaseT. Per una spiegazione delle opzioni di connessione, vedere di seguito. Lo switch è stato sostituito da uno più grande nella nostra azienda, ma funziona perfettamente. Ogni porta è stata testata singolarmente. lo switch dispone delle seguenti porte:  - 24 porte SFP+ da 10 Gigabit. - Tutte le porte SFP+ supportano la velocità di 1000 Mbps/10 GE. - 4 porte RJ45 condivise con rilevamento automatico (10GBaseT). - Tutte le porte RJ45 supportano la velocità di 1000 Mbps/10 GE - Porta USB (archiviazione di file di configurazione/firmware) - Porta seriale RS-232 per console - Gestione semplice anche tramite interfaccia web È possibile impilare fino a 4 di questi switch. È anche possibile aggiungere un secondo alimentatore ridondante allo switch, ma non è necessario. Per collegare i computer allo switch, si consiglia di utilizzare schede di rete da 10 GB con connettore SPF+; una scheda di rete di questo tipo costa circa  Il costo di una scheda di rete di questo tipo si aggira intorno agli 80-90 euro. Consiglio, ad esempio, le schede di rete PCIe Intel X520-DA1. Attenzione, gli adattatori fiber channel non sono adatti alle reti Ethernet! Esistono diversi modi per collegare le porte SFP+ (li ho provati tutti):  - cavo ad attacco diretto, da SFP+ a SFP+, ad esempio "10G SFP+ Direct Attach Kupfer kabel Passiv 30 AWG 3M", costa circa 21,- EUR.   Vantaggio: economico, svantaggio: poco flessibile, lunghezza massima 5-10 m. - oppure utilizzare 2 ricetrasmettitori SFP+ per fibra multimodale (MMF) con connettore LC - ad es.    "Modulo SFP+ originale Arista SFP-10G-SR 10GBASE-SR" su https://www.ebay.de/itm/265795799695   che costa circa 9,90 EUR al pezzo    e un cavo in fibra ottica MultiMode OM3 (più economico) o OM4 (migliore) con connettori LC su LC:    Ad esempio "Cavo in fibra ottica OM3 / OM4 multimodale LC/LC UPC Duplex | 0,5m - 200m".   unter https://www.ebay.de/itm/254174773820?var=553532499962   il miglior cavo OM4 costa 10,58 euro per 5 metri.   Vantaggio: fino a 300 m con il cavo OM3 o 400 m con il cavo OM4. Con OM4 è possibile un successivo upgrade a 40GBit! - se avete assolutamente bisogno di porte 10GBaseT, potete utilizzare le 4 porte dello switch - se avete bisogno di ulteriori porte 10GBaseT, potete utilizzare un ricetrasmettitore SFP+ a 10GBaseT.    Tale ricetrasmettitore costa circa 65 euro. - per porte 1000Base (1 GBit) aggiuntive, consiglio di utilizzare un secondo switch Netgear 1000Base-T con porta uplink SFP+ (ad esempio Netgear MS510, M4250, ecc.).  In questo modo si ottiene una rete economica, veloce e senza compromessi, con isolamento galvanico (se si utilizza la fibra ottica). ============= No tenga miedo de los puertos SFP+: es realmente fácil y también ventajoso utilizar cables ópticos. Además, un switch con SFP+ es también más barato en total que un switch con puertos RJ45 10GBaseT ruidosos. Más abajo se explican las opciones de conexión. El conmutador fue sustituido por otro mayor en nuestra empresa, pero funciona perfectamente. Cada puerto ha sido probado individualmente. el switch tiene los siguientes puertos :  - 24 puertos SFP+ de 10 Gigabit. - Todos los puertos SFP+ soportan una velocidad de 1000 Mbps/10 GE - 4 puertos RJ45 compartidos con detección automática (10GBaseT) - Todos los puertos RJ45 admiten velocidades de 1000 Mbps/10 GE - Puerto USB (almacenamiento de archivos de configuración/firmware) - Puerto serie RS-232 para consola - También se puede gestionar fácilmente a través de la interfaz web Puede apilar hasta 4 de estos conmutadores. También puede instalar una segunda fuente de alimentación redundante en el conmutador, aunque no es necesario. Para conectar ordenadores al conmutador, se recomienda utilizar tarjetas de red de 10 GB con conector SPF+.  Una tarjeta de red de este tipo cuesta unos 80-90 euros. Recomiendo, por ejemplo, las tarjetas de red Intel X520-DA1 PCIe. Cuidado, ¡los adaptadores de canal de fibra no son adecuados para redes Ethernet! Hay varias formas de conectar los puertos SFP+ (las he probado todas):  - cable de conexión directa, SFP+ a SFP+, por ejemplo "10G SFP+ Direct Attach Kupfer kabel Passiv 30 AWG 3M", cuesta unos 21,- euros.   Ventaja: barato, desventaja: inflexible, longitud máxima 5-10m - o utilice 2 transceptores SFP+ para fibra multimodo (MMF) con conector LC, por ejemplo    "Módulo original Arista SFP-10G-SR 10GBASE-SR SFP+" en https://www.ebay.de/itm/265795799695   que cuesta unos 9,90 EUR por pieza    y un cable de fibra óptica multimodo OM3 (más barato) u OM4 (mejor) con conectores LC en LC:    p. ej. "Cable de fibra óptica OM3 / OM4 multimodo patch cable LC/LC UPC Duplex | 0,5m - 200m".   unter https://www.ebay.de/itm/254174773820?var=553532499962   el mejor cable OM4 cuesta 10,58 euros por 5 metros.   Ventaja: hasta 300m con OM3 o 400m con cable OM4. Con OM4 es posible una actualización posterior a 40 GBit. - si necesita absolutamente puertos 10GBaseT, puede utilizar los 4 puertos del conmutador - si necesita puertos 10GBaseT adicionales, puede utilizar un transceptor SFP+ a 10GBaseT.    Dicho transceptor cuesta aproximadamente 65,- EUR. - para puertos 1000Base (1 GBit) adicionales recomiendo utilizar un segundo switch 1000Base-T Netgear con puerto de enlace ascendente SFP+ (por ejemplo, Netgear MS510, M4250, etc.).  De esta forma conseguirás una red barata, rápida sin concesiones y con aislamiento galvánico (si utilizas fibra óptica).
  • Condition: Gebraucht
  • Condition: jeder Port getestet, getestet und gereinigt, neue Firmware, neue Stützbatterie / every single port tested, cleaned, new firmware, new lithium battery
  • Produktart: Ethernet Switch
  • Maximale LAN Datenübertragungsrate: 10 Gbps
  • Maßeinheit: 10g
  • Layer: 2+
  • Produktlinie: NETGEAR ProSafe
  • Formfaktor: Rack einbaufähig
  • Anschlussart: SFP+
  • Herstellernummer: XSM7224S
  • Marke: NETGEAR
  • Modell: NETGEAR XSM7224S
  • Schnittstelle: SFP, SFP+
  • Anzahl der LAN-Anschlüsse: 24
  • Netzwerktyp: Ethernet
  • Ethernet-Technologie: 10 Gigabit Ethernet (10000-Mbit/s)
  • Netzwerkmanagement-Typ: Vollständig verwaltet
  • Netzwerkanschluss: Wired-Ethernet (RJ-45)
  • Maximale Datenübertragungsrate: 10 Gbps
  • Anzahl der Einheiten: 1

PicClick Insights - Netgear XSM7224S 24-Port Switch 10GBE Gigabit L2+ 10GBaseT und SFP+ Stackable PicClick Exklusiv

  •  Popularität - 5 Beobachter, 0.0 neue Beobachter pro Tag, 321 days for sale on eBay. Super hohe beobachtend. 0 verkauft, 2 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 65+ artikel verkauft. 0% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv