Cooper S 207 208 308 GT GTI DS3 Forge Motorsport Dump Ventil Adapter Abstandhalter Kit

EUR 87,62 Sofort-Kaufen oder Preisvorschlag, EUR 88,57 Versand, 14-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: haz_motorsport ✉️ (22.894) 99.5%, Artikelstandort: GB, GB, Versand nach: WORLDWIDE, Artikelnummer: 161595425999 Cooper S 207 208 308 GT GTI DS3 Forge Motorsport Dump Ventil Adapter Abstandhalter Kit. Cooper S 207 208 308 GT GTI DS3 Forge Motorsport Dump Valve Adapter Spacer Kit 1 x FMDVMCS - Atmospheric Blow-Off Sound - Fully OEM ECU Compatible - Direct Bolt On PLEASE NOTE - This product is not suitable for the 2008 onwards Cooper S with N18 Engines and Peugeot THP200 Models Product Description The FMDVMCS is a sandwich type adaptor that fits between the existing electrical solenoid and the turbo charger housing on the BMW Mini Cooper S N14 engines 2007/08(R56/57 *), Peugeot 1.6 turbo engines as found in the 207 and GTI , 208 GTI, 307, 308 and Citroen DS3. On these engines, built into the turbocharger housing, is a bypass facility. This allows charge air to be recirculated around the turbo charger from the boost side back to the intake side. This recirculation path is opened Cooper S 207 208 308 GT GTI DS3 Forge Motorsport Dump Valve Adapter Spacer Kit 1 x FMDVMCS
  • Atmospheric Blow-Off Sound
  • Fully OEM ECU Compatible
  • Direct Bolt On

PLEASE NOTE - This product is not suitable for the 2008 onwards Cooper S with N18 Engines and Peugeot THP200 Models

Product Description The FMDVMCS is a sandwich type adaptor that fits between the existing electrical solenoid and the turbo charger housing on the BMW Mini Cooper S N14 engines 2007/08(R56/57 *), Peugeot 1.6 turbo engines as found in the 207 and GTI , 208 GTI, 307, 308 and Citroen DS3. On these engines, built into the turbocharger housing, is a bypass facility. This allows charge air to be recirculated around the turbo charger from the boost side back to the intake side. This recirculation path is opened and closed by means of an electrical connection from the engine management, to a solenoid that is mounted on the turbocharger housing. As you accelerate, the turbo charger vanes are spinning and boost pressure is increased, literally blowing into the engine cylinders. Then when you change gear, you take you foot off the accelerator momentarily, select the next gear, and accelerate again. As you take your foot off the accelerator the throttle valve to the engine closes. The problem here is that during this process the turbo is still spinning and the boost pressure that it is producing has no where to go. (This is a bit like putting you hand over a hair dryer so the air cannot get out) What happens at this point is the turbo starts to stall, the spinning vanes slow down (incurring alot of stress) and the boost pressure drops. When you open the throttle valve again by pushing down on the accelerator (demanding more power) the turbo has lost its momentum, boost pressure and there is a pause or a "Lag" before the engine is producing the required power once again. To combat this loss of power and stress on the turbo, a recirculation or diverter valve is used. On the Mini, when the throttle valve closes, the engine management opens the recirculation route around the turbo. This gives the charge air an alternative route and allows the turbocharger to keep spinning so that when you accelerate again there is no "lag" or waiting period. This system works well and is adopted by nearly all vehicle manufacturers on turbo charged petrol engine applications. The only downside to this system is that a turbo chargers produce heat. (The hot air that leaves a turbo is cooled by passing it through an intercooler before it enters the engine. The cooler the air the more power is produced). By recirculating the hot air back into the intake side of a turbo the temperatures increase. This is where the Blow Off or Dump valve plays its part. By expelling the charge air to atmosphere rather than recirculating it, you do not increase the intake air temperature but you do allow the turbo to keep spinning. The side effect which is unacceptable to most vehicle manufacturers is the noise of the valve expelling the air. By fitting the FMDVMCS between the existing solenoid and the turbo housing (this involves removing only 3 bolts) the air is re-directed to atmosphere rather than recirculated. It should be noted that the engine management also uses this valve to decrease engine power when necessary. An example of this is by the (DSC) Dynamic Stability Control system. Although you would not normally hear this occurring, when a blow off adaptor is fitted you may well hear the air being expelled when the DSC operates (going too fast around a bend for example) In The Box:
  • 1 x FMDVMCS Adapter
  • 3 x Socket Cap Bolts
  • 1 x Instructions
  • 1 x Forge Sticker

Vehicle Fitment

BMW Mini R56 R57 Cooper S (Turbo N14 Engine Only ) Peugeot    207 1.6 GT TURBO (will not fit 200THP) Peugeot    208 1.6 Turbo (will not fit 200THP) Peugeot    308 1.6 GT Turbo (will not fit 200THP)

Please Note: This part does not fit the earlier 1.6 Supercharged engine / Or the later 2008 - N18 Engines / Neither does it fit the THP200 Models

IMPORTANT NOTE REGARDING - STOCK LEVELS

If you are in urgent need of this product or have any doubt of whether it is in stock due to low quantity, please contact us prior to placing your order to check for availability.

Please read bullet points before purchase:

  • The available item quantity is correct at the time of uploading this listing.

  • This product may have multiple listings due to application of other suitable vehicles which affect stock levels. 

  • This product may also be listed on our website which it may be sold through.

  • This product may also have sold through our retail store.

**Please note: The majority of Forge Motorsport products are processed straight away, but occasionally some applications have to be special ordered which can take upto a maximum of 10-15 working days for delivery. If there will be any delays in your order you will be informed within 24-48 hours.

*Image for illustration purposes only

Distributed By Haz Motorsport
  • Condition: Neu
  • Classic Car Part: No
  • Manufacturer Part Number: FMDVMCS
  • Dump Valve Type: Blow Off Valve Adapter
  • Engine Sizes: 1.6 Turbo Models
  • Reference OE/OEM Number: FMDVMCS
  • Air Induction Part Type: Filter Element
  • Brand: Forge Motorsport
  • Type: Dump Valve Adaptor Spacer Kit
  • Avaliable Colours: Polished Silver
  • Country/Region of Manufacture: United Kingdom
  • Performance Part: Yes

PicClick Insights - Cooper S 207 208 308 GT GTI DS3 Forge Motorsport Dump Ventil Adapter Abstandhalter Kit PicClick Exklusiv

  •  Popularität - 36 Beobachter, 0.0 neue Beobachter pro Tag, 3.336 days for sale on eBay. Super hohe beobachtend. 38 verkauft, 2 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 22.894+ artikel verkauft. 0.5% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv