Dinitrol Rostfestes Hohlraumwachs Aerosol-Kit Für Grosses Auto Land Rover Granada

DINITROL RUST PROOFING CAVITY WAX AEROSOL KIT FOR LARGE CAR LAND ROVER GRANADA

Item Description

DINITROL ML was developed for use in closed cavities such as doors, frame parts and external hinges and gaps. The product can be used as corrosion protection for used cars, trucks, buses and other vehicles. Benefits Brown Extremely Penetrating Stops ongoing corrosion Water displacing Oily, flexible film Wet in wet with bitumen vehicle Underbody coating Application DINITROL ML is designed for application into closed cavities such as doors, frame members and exterior joints and crevices. The product can be used for rust-proofing of second-hand cars, trucks, buses and other vehicles. Application temperature should be between 15 and 30°C. Method of use DINITROL ML is applied by spraying with manual or semi-automatic. DINITROL application equipment, and is suitable for either air-mixed or airless spraying. Pre-treatment Substrates DINITROL ML is possible to apply on mois and corroded surfaces. For the best result, loose corrosion shall be removed before application. Over-Coating / 2-Layer-Application DINITROL ML can be over-applied with any of the DINITROL bitumen underbody coatings. For additional information, please consult DINOL GmbH. Storage The product shall be stored at 15 ? 30°C and the shelf life is then 2 years in unopened original packages. Technical Data Colour brown Type of film oily, greasy Density at 23°C 860 kg/m³ Viscosity at 23°C, (DIN 2) 60 seconds Dry matter content 46% by weight Flash point 40°C Aromatic content in solvent < 1 % Recommendes film thickness 10 ?m Recommended film thickness wet 30 ?m Drying time 1 hour Heat resistance 80°C Low temperature adhesion < - 40°C Salt spray test > 96 hours Penetration in 50 ?m wide gap > 70 mm Effect on car paint none Removability White Spirit Available in 1 L Miniservice / 5L Pail / 20 L Pail 60 L Drum / 208 L Drum / Container DINITROL 4941 / 4941 CAR is a long term protective product. The product leaves a firm, black film with short drying time and good adhesion and flexibility on all metal surfaces, rubber and plastic parts. Benefits OEM references Robust universal film Self-healing Easily applied Good abrasion resistance Component protection Applications DINITROL 4941 / 4941 CAR is an underbody product or use in the treatment of vehicles during production, at import plants and in aftermarket applications. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product. A clean and economic treatment on the line is assured by the product?s ease of application and high dry matter content. DINITROL 4941 / 4941 CAR is also designed for use on spare parts, machines and iron and steel structures in highly corrosive environment. DINITROL 4941 / 4941 CAR is also very suitable as an anticorrosive coating for transport and warehousing under extremely corrosive conditions. Method of use DINITROL 4941 / 4941 CAR can be applied by manual or automatic application equipment, airless or airmix. Recommended application and product temperature is 15 ? 30°C. Pre-treatment Substrates DINITROL 4941 / 4941 CAR can be applied directly to clean, dry and corrosion free surfaces. If corrosion is present, DINITROL ML or a DINITROL cavity wax shall be applied before. Over-Coating / 2-Layer-Application DINITROL 4941 / 4941 CAR can not be over-painted. For additional information, please consult DINOL GmbH. Technical Data Colour - black Type of film - hard, waxy Density at 23°C - approx. 1100 kg/m³ Viscosity at 23°C - 800 mPas Dry matter content - 69% by weight Flash point - 36°C Aromatic content in solvent - 0,5% Recommended film thickness wet - 700 ?m Recommended layer thickness - 300 ? 500 ?m Drying time - 6 ? 12 Stunden through dry Low temperature adhesion - -20°C Removability - Hydrocarbon solvents Heat resistance - 130°C Salt spray resistance, 300 ?m - 1500 hours DINITROL RC 900 is a rust converter based on organic chelate complex combined with epoxy resin. It actively converts the rust on the substrate into a stable organic iron complex. When the product dries, it forms an impenetrable barrier to further corrosion. DINITROL RC 900 penetrates about 7?10 times deeper into the rust than conventional rust conversion products and forms a dry and strong adhesive film that is suitable as a base for the lacquer structure and as a carrier for other corrosion protection products. Benefits Polymer film formed on converted rust Deep effect Easy application Deep working properties Overpaintable Applications DINITROL RC 900 is designed for use on oxidized iron parts. Method of use Remove rust, grease and dirt with a wire brush, sand paper or a sandblasting process. Rust and scale may only be visible as slight shading. In addition to rust, the steel must also be free from dust and grease. Carefully clean with acetone or lacquer thinner. Shake the spray can well. The product should be applied in several successive coats, at a distance of approx. 25 cm. The metal temperature should not be below 10°C. The material is dust-dry after one hour, if necessary, a further coat can be applied. Pre-treatment Substrates DINITROL RC 900 should be applied to corroded surfaces. Loose rust must be removed before processing. Over-Coating / 2-Layer-Application DINITROL RC 900 can be overapplied with most DINITROL Corrosion Prevention products and with most common complete paint systems. For additional information, please consult DINOL GmbH. Technical Data Colour amber-coloured Appearance solution Film type hard Density 0,9 g/cm3 Viscosity 118 cSt Solids 16% Recommended film thickness 130 µm Yield ~ 60 g/m² per coat Drying time 24 hours at 20°C Storage time 10 years (between 15°C and 25°C) Avaialable in 400 ml Spray Kit contains : 7 x 500ml DINITROL Aerosol ML Cavity Wax 10 x 500ml DINITROL Aerosol 4941 Black Underbody Wax 1 x 400ml Aerosol DINITROL RC900 Rust Converter spray 2 x Aerosol extension nozzle. Length - 600mm 25 x 10mm black tapered plastic blanking plugs 1 x CanGun1 spray can tool

About Us

About Us

Payments

Shipping

Returns

Feedback

About Us Our aim at World of Lubricant is to provide you with the best possible customer service and value for money. We are approved distributors of  LIQUI MOLY brand. This guarantees you that your item is brand new and 100% genuine. If your preferred item is out of stock you can get in touch with us and we will do our best to order it especially for you.

Payments

Payments We currently accept PayPal payment. Once full payment is receive your goods will be dispatched. If there is any issue with payment please contact us through eBay messages.

Shipping

Shipping

We offer FREE shipping on all orders!

Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three or four days after dispatch.

In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

Please be aware that is courier was attemted to deliver parcel 3 times after it come back to us. In this Case £6 handling fee will be applied and deducted from total refund amount

Returns

Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. The buyer is responsible for return postage costs. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Feedback

Feedback Positive feedback is very important to us and we will always strive to provide 100% customer satisfaction in order to achieve this.  Once you have received your item and are happy with the purchase could you please leave a positive feedback and a 5 star DSR. Should for any reason a problem arise, please do not leave a negative / neutral feedback or open a return request please contact us immediately so we are given the chance to rectify the issue amicably.  We will provide you with a positive feedback once we have received payment confirmation.   The DSR rating 1 to 3 star is equal to negative feedback please always leave a 5 star if we deserve it thanks in advance. Helpful Links Add to Favourite Sellers Sign up to Newsletter View Feedback Contact Seller Visit seller's eBay Shop About Seller Page More Items! View more great items 3 x Forch R507 Silicone Remover Adhesion Promoter Spray Cleaner 500ML 61301571 £19.95 2 x Forch R507 Silicone Remover Adhesion Promoter Spray Cleaner 500ML 61301571 £13.95 Forch R507 Silicone Remover Adhesion Promoter Spray Cleaner 500ML 61301571 1x £7.99 Forch Elastic Engine Casing Multi Sealant Adhesive K158 80gm 64804502 - 3 Units £19.95 Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

• Condition: Neu
• Unit Type: L
• Bundle Description: Underseal Kit
• Custom Bundle: Yes
• Unit Quantity: 9L
• Country/Region of Manufacture: Germany
• Modified Item: No
• EAN: 5055516807785
• Brand: DINITROL
• Type: Rust Proofing Wax
• Manufacturer Part Number: ‎DIN4941S4C

Siehe Mehr