Electronic Ignition Kit
for Mallory Twin Point V8
For Mallory Twin Point Rover & Buick V8
Negative Earth Distributor
Sku:
K48RV8 - Electronic Ignition Kit for Mallory
Twin Point V8 Distributor - Rover & Buick V8
This ignition kit is designed to replace the
points and condenser inside the Mallory Twin
Point V8 Distributor
The Mallory Twin Point V8 Distributor was used
in some Rover and Buick engines with vacuum
advance.
It was used in Land Rover and Range Rover V8
engines as well as the Rover P6.
If you have any doubts, it is best to contact us
regarding which kit you need. We may even be
able to supply an alternate distributor for your
vehicle as there are some irregularities with
how and where and why the Mallory was used in
British vehicles.
A Powerspark Electronic Ignition Kit is
everything you need to convert your car to
electronic ignition.
Fitting is easy and instructions are included
with the packaging, as well as available online.
Works from 6 volt to 12 volt applications.
Electronic ignition will give your classic car
better starting and smoother running.
Powerspark Electronic Ignition explained in
more detail:
The kit uses a simple magnetic trigger and
optimises dwell to provide a reliable and
consistent spark across the rev range. It is
easy to install and maintenance free.
Each kit comprises a metal bracket where the
electronic module is mounted, trigger ring and
all wiring. The new electronic bracket mounts
exactly where the points and condenser baseplate
sat.
The kit connects directly to the coil using the
wires provided, red to the positive side and
black to the negative side. The ignition kit
will automatically shut down if the ignition is
left switched on without the engine running to
prevent component damage.
Powerspark Electronic Ignition Kits are designed
to work with a coil resistance above 1.5 ohms,
typically 3.0 ohms.
Do I need a High Energy Electronic Ignition
Kit?
Some performance coils operate at a lower
resistance and will need the High Energy
electronic ignition kit.
Our High Energy Electronic Ignition Kits are
designed to be used with a lower coil resistance
of less than 1.4ohms, suitable for a vehicle
that requires a more accurate and powerful
spark.
Full fitting instructions are included with your
kit, and plenty more instructions can be found
on our blog.