Honda CBF VTR VFR Hornet CBR 600 1000 Carbon Effekt Tankpad

EUR 17,50 Sofort-Kaufen, EUR 11,84 Versand, eBay-Käuferschutz
Verkäufer: honest-sal ✉️ (16.157) 99.1%, Artikelstandort: ilford, Essex, GB, Versand nach: GB und viele andere Länder, Artikelnummer: 256324365599 Honda CBF VTR VFR Hornet CBR 600 1000 Carbon Effekt Tankpad. Top Quality Resin Motorcycle Tank Pad 

​​​​​​​ honest-sal

​​​​​​​Motorcycle Accessories

 Exclusive to honest-sal ebay store

 New premium tank protection pad

​​​​​​​

- Material:             High quality,​​​​​​​ non yellowing PU (Polyurethane) resin             ​​​​​​​​​​​​​​

- Height :               20.3 cm

​​​​​​​- Width (Top) :      14.4 cm

- Width (Bottom) : 6.5 cm                           ​​​​​​​

Installation Guide:

1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.

2. Without peeling, place the pad on the tank, align it and mark with paper tape.

3. Peel and apply the pad. 

4. Press the air bubbles out.

5. Allow 12 hours for the pad to set in. Do not ride straight away.

6. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.

Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.

Feedback

- Please get in touch if you have any issues or questions.

- Don't just leave negative feedback as it won't solve the problem.

- Your satisfaction is our priority

Outstanding value resin pad. Tried and tested with hundreds of happy customers Fresh stock every month Material: PU (Polyurethane) Colour (Main): Black Type: Carbon Fibre look – not real carbon fibre Fitment: Fits most - check tank size against dimensions below Height: 20 cm Width (Top): 13 cm Width (Bottom): 8 cm PU resin is soft and stays soft over time thus avoiding lifting of edges. Stay away from cheaper epoxy resin alternatives which become brittle in no time. I test these pads frequently and order fresh stock. If you have any concerns please contact me straight away Tank pad installation guide (Duration 10-15 minutes): 1. Place the pad on the tank and see if it fits 2. Crucial step: Use IPA cleaner to clean the tank of grease, wax, polish etc. if you don’t do it properly the pad won’t stick 3. Do not use petrol or methylated spirits as they do leave a very thin layer of grease 4. Move your bike on centre stand – if you don’t have one then no big deal 5. Without peeling the pad, place it on the tank aligning perfectly and use paper tape to mark positions/corners. 6. Use a hairdryer to soften the pad if it is cold 7. Apply the pad gradually ensuring it is within your marked area 8. Using a soft cloth, press it outwards from centre to squeeze air bubbles out 9. Ensure all corners are pressed in otherwise the pad will lift 10. Allow at least 12 hours for the pad to set in Notes: Once it is done and you feel proud and satisfied, take some photos and send them to me. If I use it in my listing, I will refund you the 50% of the price of the pad. That is a promise Top Quality Resin Motorcycle Tank Pad 

​​​​​​​ honest-sal

​​​​​​​Motorcycle Accessories

 Exclusive to honest-sal ebay store

 New premium tank protection pad

​​​​​​​

- Material:             High quality,​​​​​​​ non yellowing PU (Polyurethane) resin             ​​​​​​​​​​​​​​

- Height :               20.3 cm

​​​​​​​- Width (Top) :      14.4 cm

- Width (Bottom) : 6.5 cm                           ​​​​​​​

Installation Guide:

1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.

2. Without peeling, place the pad on the tank, align it and mark with paper tape.

3. Peel and apply the pad. 

4. Press the air bubbles out.

5. Allow 12 hours for the pad to set in. Do not ride straight away.

6. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.

Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.

Feedback

- Please get in touch if you have any issues or questions.

- Don't just leave negative feedback as it won't solve the problem.

- Your satisfaction is our priority

Outstanding value resin pad. Tried and tested with hundreds of happy customers Fresh stock every month Material:                             PU (Polyurethane)              Colour (Main):                  Black Type:                                   Carbon Fibre look – not real carbon fibre Fitment:                              Fits most - check tank size against dimensions below Height:                                20 cm Width (Top):                      13 cm Width (Bottom):                8 cm   PU resin is soft and stays soft over time thus avoiding lifting of edges. Stay away from cheaper epoxy resin alternatives which become brittle in no time. I test these pads frequently and order fresh stock. If you have any concerns please contact me straight away Tank pad installation guide (Duration 10-15 minutes): 1.       Place the pad on the tank and see if it fits 2.       Crucial step: Use IPA cleaner to clean the tank of grease, wax, polish etc. if you don’t do it properly the pad won’t stick 3.       Do not use petrol or methylated spirits as they do leave a very thin layer of grease 4.       Move your bike on centre stand – if you don’t have one then no big deal 5.       Without peeling the pad, place it on the tank aligning perfectly and use paper tape to mark positions/corners. 6.       Use a hairdryer to soften the pad if it is cold 7.       Apply the pad gradually ensuring it is within your marked area 8.       Using a soft cloth, press it outwards from centre to squeeze air bubbles out 9.       Ensure all corners are pressed in otherwise the pad will lift 10.   Allow at least 12 hours for the pad to set in   Notes: Once it is done and you feel proud and satisfied, take some photos and send them to me. If I use it in my listing, I will refund you the 50% of the price of the pad. That is a promise
  • Condition: Neu
  • Brand: Unbranded
  • Unit Type: 100g
  • Main Colour: Grey
  • Country/Region of Manufacture: China

PicClick Insights - Honda CBF VTR VFR Hornet CBR 600 1000 Carbon Effekt Tankpad PicClick Exklusiv

  •  Popularität - 33 Beobachter, 0.3 neue Beobachter pro Tag, 120 days for sale on eBay. Super hohe beobachtend. 32 verkauft, 2 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 16.157+ artikel verkauft. 0.9% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv