Interlux ACT Brown Antifouling Bottom Paint Gallon Y8890U/1

Interlux ACT Ablative Antifouling Bottom PainttACT uses Ablative Technology to provide excellent season-to-season protection. Ablative Technology enables it to wear away with use and eliminates the build-up of old spent coatings and the heavy sanding needed to remove them. ACT is very effective at controlling shell fouling such as barnacles and zebra mussels and contains a Slime Fighter to control weed, slime and algae growth which helps to keep the boat bottom cleaner longer. It provides excellent protection against all forms of marine fouling in waters with moderate to heavy fouling and can be used in fresh, salt and brackish waters. Dependable performance - Season-to-season antifouling protection Ablative Technology - Eliminates paint build up and sanding Overcoats existing antifouling paint Flexible application schedule - Paint in the fall and launch in the spring All waters - Use in salt, brackish and fresh waterSizes Available: Gallon QuartColors Available: Red Green Blue Black BrownCan be applied using the following methods: Airless spray, brush, conventional spray and roller. This antifouling paint is suitable for aluminum. Alternative to Interlux ACT with Slime FighterApplication InformationHOW TO APPLY INTERLUX ACT ABLATIVE ANTIFOULING BOTTOM PAINTApplication Methods: Airless Spray, Brush, Conventional Spray, RollerFinish: MatteCoverage: 490.1 ft²/ga.Dry Times: 50F 59F 73F 95FTouch Dry 3 hours 2 hours 1 hour 30 mins Immersion 16 hours 12 hours 12 hours 8 hours Preparation and ApplicationPreviously Painted Surface Good Condition Remove all traces of loose paint and contamination by sanding the entire surface well with 80-grit wet-dry sandpaper. Remove sanding residue.Previously Painted Surface Poor Condition Completely remove all old antifouling paint using Interstrip 299E for fiberglass and wood, and by sandblasting to near white metal for steel.Bare Fiberglass Remove mold release wax using Fiberglass Surface Prep YMA601V following the product label instructions. Fill any surface imperfections with Interlux Watertite following the label instructions. Bare Fiberglass No Sanding System Clean the surface following the preparation procedure above. Apply one coat of Interlux Interprotect 2000E or Fiberglass No-Sand Primer. Follow the instructions on the label or product data sheet of the primer used. Following overcoating guidelines for the primer, apply at least two coats of ACT, allowing appropriate dry times. Bare Fiberglass Sanding System Clean the surface following the preparation procedure above. Sand with 80-grit paper. Remove sanding residue. Apply at least two coats of ACT, allowing appropriate dry times. Bare Fiberglass Blister Prevention System Clean the surface following the preparation procedures above. Sand with 80-grit paper. Remove sanding residue. Apply Interprotect 2000E to a thickness of 10 mils. Apply at least two coats of ACT, allowing appropriate drying times.Bare Wood Sand with 80-grit paper. Remove sanding residue. Apply the first coat of ACT thinned 10% with Special Thinner 216 or Brush-Ease 433. Fill seams, if necessary, with Seam Compound Brown 30. Apply 2 more coats of ACT unthinned, allowing the appropriate dry times.Mixing: Stir or shake contents thoroughly before use.Thinner: Special Thinner 216 or Brush-Ease 433.Thinning: Thin only if necessary. Thin no more than 10%.Cleaner: Special Thinner 216 or Brush-Ease 433Information sourced from the Interlux Micron Optima Product Information Sheet.

There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives.

*Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control.

Connect with Us
Find us on: