Stainless Rivnut Nutsert Insertion Tool in Operation
Video will open in a new window
[FlipperToolsVideo]Video of tool https://www.youtube.com/watch?v=ly_6NrlmAaE
M6 Rivnut Insertion Setting Tool. (SPANNER NOT INCLUDED)
High Tensile 14.9 Thread
Bush made from BRIGHT ENGINEERING STEEL.
MADE IN UK
PLEASE READ CAREFULLY IT MAY SAVE YOU SOME MONEY
Plier type tools rely on the strength of your grip, which is ok for the smaller aluminium rivnuts but if your fitting un-serrated or larger M6 - M10 steel rivnuts you may find the rivnuts turn when fitting the final screw/bolt. Using our tools you can increase the amount of torque applied when setting the rivnut thus reducing the chance of the rivnut turning.
Instruction for use.
Assuming you have the correct size drill for the rivnut.
Use a 13mm open ended spanner to hold the bush and tighten the nut with a 17mm spanner.
However if the rivnut just turns in the hole DONT PANIC !
Use a 17mm spanner to hold the bolt and tighten the nut with a second 17mm spanner.
International Buyers please ask for extra cost of postage.