EUR 118,13 Sofort-Kaufen oder Preisvorschlag, EUR 44,45 Versand, eBay-Käuferschutz
Verkäufer:123hotchef✉️(2.113)100%,
Artikelstandort:West Wickham, GB,
Versand nach: WORLDWIDE,
Artikelnummer:323747205775MITSUBISHI PAJERO 1990-2000 OBERES KUGELGELENK ABSTANDSHALTER KIT M10 SCHRAUBEN MITGELIEFERT!!!!. MITSUBISHI PAJERO 1990-2000 UPPER BALL JOINT SPACER KIT
M10 BOLTS SUPPLIED WITH THIS KIT. THIS REQUIRES YOUR UPPER BALL JOINTS AND UPPER CONTROL ARM TO BE DRILLED OUT FROM 8MM TO 10MM. I CAN ALSO SUPPLY 555 BRAND UPPER BALL JOINTS BORED OUT TO M10 IF REQUIRED. MESSAGE FOR DETAILS This kit is used to raise the height on the front of the vehicle without maxing out the Torsion bars and creating a harsh ride on the bump stops.
They also allow for greater articulation on the front end.
Doing an upper balljoint flip and fitting spacers gives you more clearance between the upper control arm and the bump stops, which will allow you to turn the torsion bar up more which will give you more lift
Intended for off road use only The kit comprises of the following
2 x 10mm ball joint spacers
6x HT bolts
6 nyloc nuts
12 washers
2x2mm camber correction shims
4x5mm camber correction shims
4x longer Top wishbone bolts with washers and nyloc nuts
Watch the fitting videos on my UTube channel https://www.youtube.com/channel/UCzSw_Qu4ggFhZtn5m-BHDew?disable_polymer=true fitting video made by a customer and forum member
https://youtu.be/BRmmGuO945Y
https://youtu.be/d3a1u7Iks2Y