CONTEC CA10S tragbarer Seitenstrom-CO2-Monitor Kapnograph Patientenmonitor SpO2

CONTEC CA10S The device adopts sidestream method to measure the parameter related to ETCO2 and AWRR. It can detect pulmonary ventilation function and reflect the circulation and pulmonary blood flow and indirectly reflect the alveolar ventilation. Meanwhile, it can also detect the blood oxygen saturation and pulse. The application population is adult patient. It is applicable for use in emergency department, ICU, operating room, respiratory department and other occasions. It is connected to the nose end of the patient through the sampling tube (applied part) . Features 1)End-tidal CO2 measurement function; 2)Respiration rate measurement function; 3)SpO2 measurement function; 4)Pulse rate measurement function; 5)Optional three units; 6)With audible and visual alarm and silencing functions, the alarm limit can be set; 7)Over-limit alarm function for EtCO2, Respiration rate, SpO2 and Pulse rate; 8)Low battery alarm function; 9)With the prompt function of “Checking Filterline”; 10)User can calibrate zero by themselves. 11)With atmospheric pressure and temperature compensation functions 12)Rechargeable lithium battery, up to 8-hour user time; Performance End-tidal CO2 measurement: 1）Measurement range: 0 mmHg ~ 150mmHg 2）Resolution: 1mmHg 3）Accuracy: 0 mmHg ～ 40 mmHg：±2 mmHg; 41 mmHg ～ 70 mmHg：±5% of readings; 71 mmHg ～ 100 mmHg：±8% of readings; 101 mmHg ～ 150 mmHg：±10% of readings. Respiration rate measurement: 1）Measurement range: 2rpm～120rbpm; 2）Resolution: 1rpm; 3）Accuracy: ±1rpm. SpO2 measurement: 1)Measurement range: 30 % ～100 %; 2)Resolution: 1 %; 3)Accuracy:                 70 % ～ 100 %：2 %;                30 % ～ 69 %：undefinition. Pulse rate measurement: 1)Measurement range: 25 bpm ～ 250 bpm; 2)Resolution: 1bpm; 3)Accuracy: ±2 bpm or ±2%,whichever is greater. Safety characteristic: 1）Device type: internally powered equipment; 2）Degree of protection against electric shock: type BF applied part; 3）Degree of protection against ingress of liquid: IPX1. Other parameters： 1）Preheat time: 2min; 2）Response time: < 3s; 3）Alarm sound pressure level: 50 dB; 4）Battery life time: 8hours; 5）Gas sampling rate: 60 ml/min ~ 100 ml/min. Accessories User Manual Blood oxygen probe Sampling tube(Nasal tube with filter cotton) USB cable Physical Characteristic Dimension: 159*72*31 mm Weight: 270 g Working environment Temperature: 5℃~40℃ Relative humidity: 30%~ 75%, no condensation Atmospheric pressure: 700hPa~1060hPa Power supply: DC 3.7V (rechargeable lithium batteries) Input power: ≤1.5VA  Buy Safe Product The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE:  The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.

• Condition: Neu
• Herstellernummer: 69450401
• Marke: CONTEC
• Herstellungsland und -region: China
• Maßeinheit: Einheit

Siehe Mehr