868MHz/915MHz Empfänger RC SAW Bandpassfilter 1dB 4MHz Bandbreite mit SMA

EUR 31,11 Sofort-Kaufen, Kostenloser Versand, eBay-Käuferschutz
Verkäufer: xintegroup-de ✉️ (7.441) 98.7%, Artikelstandort: 深圳, CN, Versand nach: WORLDWIDE, Artikelnummer: 154895202579 868MHz/915MHz Empfänger RC SAW Bandpassfilter 1dB 4MHz Bandbreite mit SMA.

868MHz/915MHz RFID IOT Receiver Remote Control SAW Bandpass Filter 1dB 4MHz Bandwidth with SMA Connector for Radio Amplifiers

SMA-M means male connector SMA-F means female connector 868MHz filter: The 1dB bandwidth of this filter is 4MHz, optimized for the performance of 868MHz RFID receivers, standard LoRa IoT node devices European, which can effectively filter out-of-band signals, reduce noise, and increase dynamic range. Model: FBP-868s Impedance: 50 Ohms Center Frequency: 868MHz Passband (1dB bandwidth): 866 to 870 MHz Band insertion loss: <3.5 dB Maximum load power: 100 mW (20 dBm) Interface: SMA-M, SMA-F

915MHz filter: This filter has a 26MHz 1dB bandwidth and is optimized for use in 915MHz RFID receivers to effectively filter out-of-band signals, reduce noise and increase dynamic range. Model: FBP-915s Impedance: 50 Ohms Center Frequency: 915MHz 1dB pass band: 902 to 928 MHz Band insertion loss: <= 2.0 dB Maximum load power: 100 mW (20 dBm) Interface: SMA-M, SMA-F

1090MHz filter: This filter guarantees an access bandwidth of 30MHz with low insertion loss. Optimized for performance on 1090MHz ADS-B receivers, Effectively filters out-of-band signals, reduces noise and increases dynamic range. The device is ultra-small and easy to use. Model: FBP-1090s Impedance: 50 Ohms Center Frequency: 1090MHz Bandwidth (1 dB bandwidth): 30 MHz 30dB Bandwidth: <80MHz Band insertion loss: 1.7 to 2.2 dB Maximum load power: 100 mW (20 dBm) Interface: SMA-M, SMA-F

5.8G filter: This filter has a center frequency of 5750MHz and a 3dB bandwidth of about 600MHz, and is a film circuit structure fine multi-layer It is used for interference resistance and performance optimization of 5.8G wisax, WiFi and other wireless system receiving devices. It can effectively filter out-of-band signals, reduce noise, and increase dynamic range. Model: FBP-5800 Impedance: 50 Ohms Center Frequency: 5750MHz 3 dB band: 5450 ~ 6100 MHz Insertion Loss: <2.5dB @ 5100~6050MHz Maximum load power: 5 W (37 dBm) Interface: SMA-M, SMA-F (symmetrical RF characteristics at both ends, non-directional)

400-475MHz filter: The characteristics Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling. The applications 400 ~ 475 MHz (433.92 MHz, 435MHz) Dedicated VTX receiver, laboratory and other highly selective applications. Model: FBP-433 Impedance: 50 Ohms Center Frequency: 433MHz Center Frequency Insertion Loss: <= 3.5 dB @ 433 MHz 3 dB bandwidth: 390 to 470 MHz 30 dB bandwidth: 350 to 560 MHz Impedance band greater than 50 dB: DC ~ 250 MHz and 1100 ~ 2500 MHz Maximum load power: 10W (40dBm) Interface: SMA-M, SMA-F

<img src="https://ae01.alicdn.com/kf/S33a1eece79184eb595201fda2c4cb6a76.jpg" data-ke-src="https://ae01.alicdn.com/kf/S33a1eece79184eb595201fda2c4cb6a76.jpg" data-spm-anchor-id="a2g0o.detail.1000023.i36.32bc4446H1UN36" style="box-sizing: border-box; -webkit-tap-highlight-color: transparent; outline: 0px; vertical-align: middle; border: 0px; margin: 0px; padding: 0px; max-width: 100%;" font-size:14px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:400;letter-spacing:normal;orphans:2;text-align:start;text-indent:0px;text-transform:none;white-space:normal;widows:2;word-spacing:0px;-webkit-text-stroke-width:0px;background-color:#ffffff;text-decoration-style:initial;text-decoration-color:initial;"="">

2.4G 2440MHz filter: This filter has a bandwidth of 80MHz and is used to optimize the performance of 2.4GHz receivers and to prevent WiFi interference, systems compatible with Bluetooth and Zigbee. Which can effectively filter out-of-band signals, reduce noise and increase dynamic range. Model: FBP-2440s Impedance: 50 Ohms Center Frequency: 2440MHz Spurious: 2400 ~ 2480 MHz Band insertion loss: <3.5 dB Maximum load power: 10mW (10dBm) Interface: SMA-M, SMA-F

144MHz filter: The characteristics Ultra-small size, excellent selectivity, high out-of-band rejection. The applications 144MHz for communication receivers, for HAM 2m band, laboratory and other high selectivity applications. Model: FBP-144 Impedance: 50 Ohms Center Frequency: 144MHz Center Frequency Insertion Loss: 2.5 to 3.0 dB @ 144 MHz 3 dB bandwidth: 127 to 157 MHz 30 dB bandwidth: 105 to 200 MHz Impedance band greater than 50 dB: DC ~ 85 MHz and 300 ~ 1400 MHz Maximum load power: 3 W (35 dBm) Interface: SMA-M, SMA-F

915(890-970)MHz filter: The characteristics Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling. The applications Dedicated 890-970 MHz VTX receiver, laboratory and other highly selective applications. Model: FBP-915 Impedance: 50 Ohms Center Frequency: 935MHz Center Frequency Insertion Loss: 2.3 to 2.8 dB @ 915 MHz 3 dB bandwidth: 890 to 970 MHz 30 dB bandwidth: 780 to 1070 MHz Impedance band greater than 50 dB: DC ~ 500 MHz Maximum load power: 10W (40dBm) Interface: SMA-M, SMA-F

900MHz filter: This product is a narrow band low noise RF amplifier, the product covers 10MHz ~ 2.4GHz frequency band. It can improve the sensitivity receiver and reduce system noise. This product has a strong aluminum protective shell, anti-electromagnetic interference, shape compact, can be directly inserted into the original antenna system to use. (Note: This product is not waterproof, waterproof treatment needs to be done for outdoor use.) Model: AMP-900 Impedance: 50 Ohms Noise factor: <= 2.5dB Center Frequency Gain: >= 20 dB @ 850 ~ 950 MHz (Typical Value: 20 ~ 22 dB Input reflection loss: > 15 dB @ 900 MHz Supply voltage: + 5 VDC Operating current: 15 to 20mA Maximum input power: < 0 dBm P1dBm: ≈ 6dBm

403MHz filter: This filter has a low insertion loss in band and is designed to optimize the performance of 403 MHz satellite reception equipment. It can effectively filter out-of-band signals, reduce noise, and increase dynamic range. This product has an ultra-thin PCB board on the inside, which still has excellent suppression ability for far out-of-band signals, and its performance is much better than those of products made of bare PCB board; Uses an aluminum alloy protective shell, which is anti-interference, has no false feedback outside band, compact, resistant and easy to use. Model: FBP-403s Impedance: 50 Ohms Center Frequency: 403MHz 1dB pass band: 401-405 MHz Insertion Loss: < 2.5dB @ 401 ~ 405 MHz Maximum load power: 100mW (20 dBm)

870MHz filter: The characteristics Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling. The applications GSM mobile test systems, RFID communication systems, laboratories and other highly selective applications. Model: FBP-870 Impedance: 50 Ohms Center Frequency: 870MHz Center Frequency Insertion Loss: 2.5 to 3.0 dB @ 870 MHz 3dB Bandwidth: 825 to 920MHz 30 dB bandwidth: 740 to 1000 MHz Impedance band greater than 50 dB: DC ~ 650 MHz and 1150 ~ 2200 MHz Maximum load power: 10W (40dBm) Interface: SMA-M, SMA-F

  • Condition: Neu
  • Model: 868MHz
  • Marke: XT-XINTE
  • Produktart: Filter

PicClick Insights - 868MHz/915MHz Empfänger RC SAW Bandpassfilter 1dB 4MHz Bandbreite mit SMA PicClick Exklusiv

  •  Popularität - 3 verkauft, 10 verfügbar. 1 beobachter, 0.0 neue Beobachter pro Tag, 748 days for sale on eBay. Normale beobachtend.
  •  Bestpreis -
  •  Verkäufer - 7.441+ artikel verkauft. 1.3% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv