The SLUK Bullet TL Scomadi screen is exclusive to SLUK and will fit all Chinese built Scomadi TL models
Like our other classic screens, the Bullet TL screen was inspired by the original café racer Biemme screen from the 1960s and of course our XL5 for the Li/GP/SX, although the styling and fit have been tweaked to suit the Scomadi headset (we’ve also trimmed it slightly further back now for a more flattering shape).
There are no ugly brackets. Instead, the screen clamps around the headset using a special Hi-Torque* stainless steel band fastener.
The original Biemme screens were made from 2mm plastic. Ours are made from 4mm acrylic-coated ABS material and come in a choice of high gloss black, white, silver or carbon effect and can be painted to match your scooter for that bespoke look.
Does it do anything?
It improves aerodynamics, speed and riding comfort simply by deflecting some of the wind that would normally hit you in the chest. You should expect 1 or 2 mph improvement in top speed as a result. This is cheap and effective tuning. Also the screen provides a place behind which you may hide additional instruments or a GPS unit without spoiling the look of your scooter.
Assembly
It’s hardly an IKEA sideboard but there is a minor bit of home assembly required, the clear ‘cockpit’ and laser-cut stainless trim (peel off the backing paper if you want a polished finish to your trim, or use the other way up for a matt finish) needs attaching to the main part of the screen using the supplied 7 stainless steel bolts and Nyloc nuts. The metal trim sits uppermost.
Fitting
Fitting is simple thanks to the Hi-Torque fastener which slides over the inner lip of the screen. Not only is it quick and easy to fit but it also means taking it off is simple when you need to get into the headset to change a bulb.
Wrap it
Before fitting simply wrap a length of quality electrical tape (Gaffa tape, or 3M tape gives good adhesion and is thick enough to allow the Hi-Torque fitting to grip firmly) around your headlight rim and any painted areas that the screen touches. The tape serves to protect the paintwork and also to give the gloss screen a good surface to grip on to. Simply slide the screen over the headlight rim and tighten the clip, either using a screwdriver or socket.
Adjustment
The screen has been trimmed for clearance to the legshields but it can be trimmed further at home if needed to clear any accessories you have. You can trim the ABS with a Dremel or a hand file.
FEATURES:
These items are made to order but delivery is usually within 5-7 days in the UK.
* Hi-Torque fasteners can be tightened to 15Nm (approximately 3 times tighter than a traditional hose clip) however over-tightening risks damage to the screen. We recommend you periodically tighten the band to ensure the screen remains firmly fixed.
* At least a single layer of electrical tape must be applied to the headset before fitting the screen if you do not want the paint to become marked during use.
SLUK Shop is the online sales outlet for ScooterLab.UK - we re a UK based online scooter magazine and develop products for ourselves and our readers.
If you have any questions then please do not hesitate to contact us through the eBay messaging system.
We will always help you to have a 100% positive happy buying experience. Contact us if you are unhappy about any aspect of your purchase from us. We only want five star feedback from you so buy with confidence.
View Our Categories