De-tools007
Your Best Online Business Partner
Function:
This is must-have accessory to tightly attach the fender or something other on your boat, with this tool you can never worry about knot tying and excess rope again.
Easy Operation:
One hand operation designed, click and push to insert in, click and pull to release out. 3/8 inch holder designed to use with 3/8 inch receiver(receiver not included).
316 Stainless steel:
Provide improved ultimate corrosion resistance than 304 stainless steel, Superior durability to endure long time soak in the salty sea water or fresh water. Anti-wear designed to reach a long time use.
Features:
Dentless Tip provides a buffer between holder and receiver, effectively protect the receiver out of wear and tear. Hand-polished soft edges, passivated and soft-edged top, tip and tab. Protects your rope and fender mount from wear and scratch.
Perfect Design:
1. One quick-release button of the cleat allows you to quickly and effortlessly dock and undock with single hand.
2. Simply click the button, drop the pin into the receiver and you’re ready to go.
3. The cleat would attach the fender tightly to your boat.
4. No worry about knot tying and excess rope again. Indispensable accessory on your boat.
Installation Tips:
1. Before installing the receiver, please using the Locator Disk and mark dead center of the receiver with a pencil.
2. Be sure to check that there are no structural members, cables, etc. behind the drilled holes.
3. Always finish drilling from the outside. This will minimize the risk of damaging the gelcoat.
4. Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole
Installing the Receiver:
1. Clean inside and outside surfaces.
2. Screw install tool into the brass nut plate.
3. Remove protective film from adhesive tape.
4. Pivot nut plate, insert in hole, pivot back and pull several times to adhere tape on back side of fiberglass.
5. Unscrew install tool.
6. Apply marine grade silicone to underside of receiver head.
7. Apply Loctite to receiver threads, screw into brass nut plate and tighten with Allen wrench.
Package Includes:
1 pcs Quick Release Boat Fender Holder
Item Specifics | |
---|---|
Hersteller | DT-Auto |
Garantie | 1 Jahr |
Herstellernummer | DTQP1151 |
Produktart | Quick-Release Boat Fender Holder |
EAN | Nicht zutreffend |
1. Alle gängigen Kreditkarten werden von unserem sicheren Zahlungsprozessor Payoneer akzeptiert.
2. Wir versenden Artikel an Ihre Ebay-Adresse. Bitte stellen Sie sicher, dass Ihre Ebay-Adresse korrekt ist, bevor Sie bezahlen, da sie nach Abschluss der Zahlung nicht mehr geändert werden kann.
1. Der Artikel wird innerhalb von 1-2 Werktagen nach Zahlungseingang versandt.
2. Bitte stellen Sie sicher, dass die Lieferadresse in Ihrem Ebay-Konto korrekt und aktuell ist.
3. Alle unsere Artikel werden von unserem Lager aus versendet.
4. Bitte zögern Sie nicht, uns per Ebay-Nachricht zu kontaktieren, wenn Sie irgendwelche Probleme haben.
1. Senden Sie uns innerhalb von 30 Tagen ab Lieferdatum zum Umtausch oder zur Rückerstattung zurück. Die Rückerstattung erfolgt als Geld-zurück- oder Artikelumtausch (Wahl des Käufers).
2. Die Rücksendegebühr liegt in der Verantwortung des Käufers, es sei denn, die Rücksendung ist auf unseren Fehler zurückzuführen.
3. Wenn Sie eine Rücksendung benötigen, wenden Sie sich bitte an unseren Kundendienstmitarbeiter, teilen Sie uns das detaillierte Problem mit und senden Sie uns einige Bilder zur Bestätigung.
Bitte kontaktieren Sie uns über ebay über "Mitglied kontaktieren". Wir werden innerhalb von 1 Werktag oder weniger antworten. Vielen Dank für Ihr Verständnis.
De-tools007
Your Best Online Business Partner
DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US |
Shop Category Store Home
Bootsteile & Zubehör
Autoteile & Zubehör
Garten & Terrasse
Stromaggregat-Ersatzteile
Auto & Motorrad: Teile
Business & Industrie
Sport
Other Hot Item
|
3/8'' Marine Stainless Steel Quick Release Boat Fender Holder Kit Boat Rope
Function:
This is must-have accessory to tightly attach the fender or something other on your boat, with this tool you can never worry about knot tying and excess rope again.
Easy Operation:
One hand operation designed, click and push to insert in, click and pull to release out. 3/8 inch holder designed to use with 3/8 inch receiver(receiver not included).
316 Stainless steel:
Provide improved ultimate corrosion resistance than 304 stainless steel, Superior durability to endure long time soak in the salty sea water or fresh water. Anti-wear designed to reach a long time use.
Features:
Dentless Tip provides a buffer between holder and receiver, effectively protect the receiver out of wear and tear. Hand-polished soft edges, passivated and soft-edged top, tip and tab. Protects your rope and fender mount from wear and scratch.
Perfect Design:
1. One quick-release button of the cleat allows you to quickly and effortlessly dock and undock with single hand.
2. Simply click the button, drop the pin into the receiver and you’re ready to go.
3. The cleat would attach the fender tightly to your boat.
4. No worry about knot tying and excess rope again. Indispensable accessory on your boat.
Installation Tips:
1. Before installing the receiver, please using the Locator Disk and mark dead center of the receiver with a pencil.
2. Be sure to check that there are no structural members, cables, etc. behind the drilled holes.
3. Always finish drilling from the outside. This will minimize the risk of damaging the gelcoat.
4. Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole
Installing the Receiver:
1. Clean inside and outside surfaces.
2. Screw install tool into the brass nut plate.
3. Remove protective film from adhesive tape.
4. Pivot nut plate, insert in hole, pivot back and pull several times to adhere tape on back side of fiberglass.
5. Unscrew install tool.
6. Apply marine grade silicone to underside of receiver head.
7. Apply Loctite to receiver threads, screw into brass nut plate and tighten with Allen wrench.
Package Includes:
1 pcs Quick Release Boat Fender Holder 1. Alle gängigen Kreditkarten werden von unserem sicheren Zahlungsprozessor Payoneer akzeptiert.
1. Der Artikel wird innerhalb von 1-2 Werktagen nach Zahlungseingang versandt.
1. Senden Sie uns innerhalb von 30 Tagen ab Lieferdatum zum Umtausch oder zur Rückerstattung zurück. Die Rückerstattung erfolgt als Geld-zurück- oder Artikelumtausch (Wahl des Käufers).
Bitte kontaktieren Sie uns über ebay über "Mitglied kontaktieren". Wir werden innerhalb von 1 Werktag oder weniger antworten. Vielen Dank für Ihr Verständnis. All rights reserved. |