Location:Isle of Colonsay,
Ships to: Worldwide,
Item:323782726084Comes with FREE Torx T10 driver bit! This plug is designed for use in EV charging cables and will mate with any J1772 specified socket.It is rated at 70A and therefore are suitable for 16A and 32A or higher current applications as per the IEC 61851-2001 / SAE J1772-2001 standard. The conductors should be crimped on into the contacts using a heavy-duty (eg, hydraulic) crimper. The 3 main contacts can accept conductors with a 10mm2 maximum CSA. The plug comes with the 2 resistors required for correct communication with the EV and these are pre-soldered to the integrated, water resistant microswitch. Please note that the cable entry gland hole diameter is 16mm. If you want to use a cable of wider diameter, a work-around could be easily and safely achieved by removing extra insulation from the plug-end of the cable and to use good quality, heavy-gauge, heat-shrink tubing to protect the cable whilst offering a smaller overall diameter that would fit the gland hole.A small padlock can be used (not supplied) to secure the plug to the car whilst charging. The padlock shackle must have a diameter of no more than 4mm.Plug Dimensions (mm):- 240 L, 75 H, 55 W (all with dust cap on) Weight:- 400gThe plug can be disassembled with a T10 Torx driver bit (needs to be at least 35mm long - included in purchase price).The plug can also be purchased from my webshop (EVBitz.uk) with various lengths and types of EV charging cable pre-attached as well as with the driver bit mentioned above.I include free postage using Royal Mail which usually takes 3-4 working days within mainland UK but may be as much as 7 days. I will post internationally. I can also use whatever postage solution you want at potentially extra cost. The £10 international postage is an estimate only. Please agree alternative postage method and price before buying to avoid disappointment.I also sell EVSEs, T1 plugs and sockets, specialist 3+2 core EVSE flex, EPC kits and T1 & T2 wall 'holsters' as well as pre-assembled EV charging cables and replacement/alternative, pre-wired EVSE plug and cable sets and cable stowage bags - please see my other listings or EVBitz.uk.I am an avid EVer with a wish to further the EV movement and am trying to achieve this by helping to bring down the price of EV ancillaries such as this item. My price is very keen (you will see this exact same item for sale at well over £100 - inc P&P & VAT on many other UK sites) but it still allows me a small margin of profit dictated mainly by economies of scale in ordering.Condition:New, Brand:Dostar
PicClick Insights for "
T1P - Type 1 (J1772) Electric Vehicle EV Charging Plug by DUOSIDA 16A 32A 0.41kg