Location:Isle of Colonsay,
Ships to: Worldwide,
Item:323782726078This socket is designed for use in EVs as the car-side charging connection and will accept a compatible, Type 2, FEMALE plug. It has a plastic, tethered, twist-on dust cap. It does not contain any illumination LEDs but has provision for fitting them behind the red and green lenses. It comes with 4 x stainless steel M5 x 15mm Countersunk hex-drive bolts, washers and nyloc nuts.The socket can also be ordered from my companion webshop with (or without) 1 or 3 phase, 16A (2.5mm2 CSA) or 32A (6.0mm2 CSA) copper wire tails pre-attached using an 8T hydraulic crimper. Standard cable lengths are 1, 3, & 5m. These come in a flexible orange conduit, 20mm in diameter (O/S dimension). Longer lengths may also be ordered by special arrangement. The socket is 3 phase (3P) compatible and it comes with 3P connections included - the only difference between 1P and 3P plugs is the size of the cable inlet. 1P plugs have a maximum cable diameter of 18mm; 3P plugs have a maximum cable diameter of 25mm. Therefore, if you want to use 16A, 3P cable, you can order a 1P plug as the cable entry will be large enough. If you want to use a 3P 32A cable you must order a 3 phase plug. All connectors have a conductor entry hole of 4mm diameter, large enough for 10mm2 (60A-70A) conductors, maximum. NOTE: The connectors in these plugs require crimping with a suitable (high power) crimper eg a hydraulic one. The socket is IP54 rated. Approximate Dimensions (mm):- 160L, 110H & W. 425g. The socket can be disassembled with a T15 Torx driver (bit/blade needs to be at least 35mm long due to the depth of the head of some screws within the socket body). The long bit is available on the webshop at EVBitz.uk. Free Royal Mail/ParcelForce postage is included which usually takes 2-3 days within mainland UK (excluding weekends) - but may take as much as 7 days.Condition:New, Brand:Duosida (Dostar)
PicClick Insights for "
T2MS - Type 2 (Mennekes) 62196 EV Charging Socket - MALE - 63A max - 0.43kg