UK SELLER
SAME DAY POSTAGE IF BOUGHT BEFORE 11:30PM
iSPEED In-channel wind deflectors Tinted
supplied with metal clips
Wind Deflectors Advantages:
Improved air circulation
Minimize interior heat whilst parked
Sleek aerodynamic look
No unsightly exterior tape
Can be painted
Reduce dirt and debris on
the side window thus improving visibility
Wind Deflectors Features:
Made from tough acrylic plastic
OEM Quality ISO 9001 and TUV Approved
Mounting parts included
Car wash safe
Optically transparent
WHAT IS INCLUDED IN THE PACKAGE:
WIND DEFLECTORS
METAL CLIPS
SHIPPING:
PLEASE NOTE THAT THE FREE POSTAGE IS ONLY FOR UK MAIN LAND
SHIPPING TO HIGHLAND ISLANDS AND REMOTE POSTCODES WILL BE CHARGED
AND THE DELIVERY WILL TAKE 3 WORKING DAYS.
RETURNS:
we accept the returns within 14 days
please get in touch with us via ebay messaging
and we will guide you through the return process
please give us a chance to resolve any issue before leaving any negative feedback.
FITTING INSTRUCTIONS FOR ELECTRIC WINDOWS WITH ANTI TRAP DEVICE
1: Take care – some edges and corners of the deflector can be sharp. Please take care when removing from the box and fitting.
2: Open the window completely
3: Lubricate the milled edge of the deflector with either a silicone spray or washing up fluid.
4: At the mirror end of the window rest the bottom edge of the deflector on the hard rubber window seal.
5: If you place it on the soft part of the rubber the deflector will not hold under tension.
6: Push the other end of the deflector into the window channel – you may need to gently bend the deflector.
7: Starting from the mirror end use both hands to ease the milled edge of the deflector into the rest of the window channel not between the rubber and the metal frame.
8: Close the window in several small steps – assist with your hand if need be..
9: fit 2 clips each side, check where the window is making the most resistance and fit the clip near that position.
AFTER FITTING THE WIND DEFLECTORS ACCORDING TO THE FITTING INSTRUCTIONS, PLEASE CONSIDER THE FOLLOWING POINTS
1: Operate the electric window button and close the window gradually in several small steps. Please repeat this procedure at least five times.
2: Then operate the electric window button and slowly close the window completely.
3: After this please keep the door window closed for 24 hours so that the wind deflector is pressed into the rubber by the permanent pressure of the glass.
4: After being closed for 24 hours the electric windows will work correctly.
5: Rear deflectors must be fitted at an angle into the window channel, once both ends are inside the window channel, slide the lower end to its position and secure with metal clips.